English
Connections
Step 1: Placing speakers | Step 2: Connecting speakers |
●Place the left and right speakers at equal distances from the TV set and at an angle of approximately 45 degrees from the listening position.
Notes:
–To avoid magnetic interference, do not position the front speakers too close to your TV set.
–Allow adequate ventilation around the DVD System.
IMPORTANT!
The type plate is located on the bottom of the system.
To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it.
●Connect the speaker wires to the SPEAKER terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to
Notes:
–For optimal sound performance, use the supplied speakers.
–Do not connect more than one speaker to any one pair of +/- speaker terminals.
–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
10