English | Basic operations |
1 Press SYSTEM MENU to enter the Setup | |
| Menu. |
2Press à/á to select a page to be set.
3Press 5/4 to highlight an option.
4Enter its submenu by pressing á or OK.
5Move the cursor by pressing 5/4 to highlight the selected item.
➜ In cases of value setting. press 5/4 to adjust values.
6Press OK to confirm.
To return to the
●Press à.
To exit from the menu
●Press SYSTEM MENU again.
➜ The settings will be stored in the player’s memory even if the player is switched off.
Note:
–Some of the features in the System Menu Options are described in “Getting Started”.
General Setup Page
The options included in General Setup Page are: “OSD Lang”, “Screen Saver” and “DIVX VOD”.
OSD Lang
See "Getting
28
Screen Saver
This function is used to turn the screen saver on or off.
DIVX VOD
Philips provides you with the Divx(R)VOD registration code that allows you to rent or purchase videos from Divx(R) VODE service at www.divx.com/vod. All the downloaded videos from Divx(R)VOD can only be displayed back on this unit.
Press á or OK to enter its submenu, then press OK again to see the registration code.
Audio Setup Page
The options included in Audio Setup Page are: “Night Mode”,“Digital Output” and “Dolby Digital Setup”.
Night Mode
➜On: Select this to level out the volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.
➜Off: Select this when you want to enjoy the surround sound with its full dynamic range.
This feature is only available for movies with Dolby Digital mode.
Digital Output
➜Digital Off:Turns off the digital output.
➜Digital / Raw: If you have connected your DIGITAL OUT (COAXCIAL or OPTICAL) to a
➜SPDIF / PCM: Only if your receiver is not capable of decoding