Connections
English
Using component Video In jack (Pr PbY)
●Use the component video cables (red/blue/ green, not supplied) to connect the system’s PR/ PB/Y jacks to the corresponding Component video input jacks (or labeled as Pr/Cr Pb/Cb Y or YUV) on the TV set.
●To hear the sound of this DVD Player through your TV, use the audio cables (white/red, supplied) to connect LINE OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV.
Y | PB | PR |
Notes for progressive scan video:
–The progressive scan video quality is only possible when usingY Pb Pr, and a progressive scan TV is required.
–If you are using a Progressive Scan TV (TV must indicate Progressive Scan or ProScan capability), to activate TV Progressive Scan, please refer to your TV user manual. For DVD system’s Progressive Scan function, see “Getting Started - Setting up Progressive Scan feature’’.
–If your TV does not support Progressive Scan, you will not be able to view the picture.Turn off progressive scan in PROGRESSIVE menu of the system setup menu.
Using S-Video In jack
Y | PB | PR |
●Use the
●To hear the sound of this DVD Player through your TV, use the audio cables (white/red, supplied) to connect LINE OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV.
Using an accessory RF modulator
IMPORTANT!
–If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.
Y | PB | PR |
●Use the supplied composite cable (yellow) to connect the system’s COMPOSITE VIDEO jack to the video input jack on the RF modulator.
●Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.
10