Philips MCD908 manual Setting language preference, Setting the OSD Language, To exit from the menu

English

Step 3: Setting language preference

You can select your own preferred language settings.This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead.The OSD language in the system menu will remain once selected.

Setting the OSD Language

1Press SYSTEM.

2Press 1 2 to select “General Setup Page”.

3Use 1 2 3 4 on the remote to navigate in the menu.

Move to “OSD Language” and press 2.

4Select a language and press OK.

To exit from the menu

●Press SYSTEM again.

Setting the Audio, Subtitle and Disc

Menu language

1Press SYSTEM in stop mode.

2Press 1 2 to select “Preference Page”.

3Press 3 4 to highlight the following in the Preference Page.

–“Audio” (disc’s soundtrack)

–“Subtitle” (disc’s subtitles)

–“Disc Menu” (disc’s menu)

4Enter its submenu by pressing 2.

5Select a language and press OK.

6Repeat steps 3~5 for other language settings.

To exit from the menu

●Press SYSTEM again.

If you choose OTHERS in Audio, Subtitle or Disc Menu,

1Press 3 4 to highlight “Others”.

2Press OK.

3When you are asked to enter a language code, input a language code by using the Numeric Keypad (0-9).

4Press OK to confirm.