Philips MCD908 manual System Menu Options, Basic operations, General Setup

System Menu Options

English

Basic operations

1Press SYSTEM to enter the Setup Menu.

2Press 1 2 to select a page to be set.

3Press 3 4 to highlight an option.

4Enter its submenu by pressing 2 or OK.

5Move the cursor by pressing 3 4 to highlight the selected item.

➜ In cases of value setting, press 1 2 to adjust values.

6Press OK to confirm.

To return to the upper-level menu

●Press 1 or OK (in cases of value adjustment).

To exit from the menu

●Press SYSTEM again.

➜ The settings will be stored in the player’s memory even if the player is switched off.

Note:

–Some of the features in the System Menu Options are described in “Getting Started”.

General Setup Page

The options included in General Setup page are: “TV Display”,“OSD Language”, “Screen Saver”and “DIVX Code”.

TV Display

Set the aspect ratio of the DVD Player according to the TV you have connected.

➜NORMAL/PS: If you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen.

➜4:3 NORMAL/LB: If you have a normal TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed.

➜WIDE: If you have a wide-screen TV.

OSD Language

See “Getting Started-Step 3: Setting language preference”.

Screen Saver

This function is used to turn the screen saver on or off.

CODE

CODE

➜On: In STOP, PAUSE or No DISC mode, if no actions are performed about 3 minutes, the screen saver will be activated.

➜Off: Screen saver is disabled.

28