Troubleshooting
The remote control does not function.
The display is dark.
Low hum or buzz sound.
Low bass response.
Unable to select Progressive Scan.
No sound is output from the HDMI jack.
✔Select the correct source (DISC or TUNER, for example) before pressing the function button.
✔Point the remote control at the remote sensor of the unit.
✔Reduce the distance to the player.
✔Remove any possible obstacles.
✔Replace the batteries with new ones.
✔Check that the batteries are loaded correctly.
✔Press DIM again.
✔Place the DVD micro system as far away as possible from electrical devices that may be causing interference.
✔Check all speakers for correct polarity.
✔Check that the output of the video signal is switched to 'Pr/Cr Pb/Cb Y'.
✔Check the connection between the TV and the HDMI jack of the DVD player.
✔See if the TV supports this 480p/576p/720p/ 1080i DVD player.
✔Check your TV system setup correctly.
English
39