Sony MDS-E10 manual Operations you may want to do during recording Press, When you pause recording

Page 19

Operations you may want to do during recording

To

Press

Stop recording

x

Pause recording

7

Resume recording after

7

Eject the MD

after stopping recording A

Changing display during recording

Press LEVEL/DISPLAY/CHAR (DISPLAY) repeatedly. For the contents of display, see “Using the Display Window” on page 12.

When you pause recording

The track number increases by one. For example, if you pause recording while recording track 4, the track number will be 5 when you resume recording.

To prevent accidental erasure of the recorded material

To make it impossible to record on an MD, slide the record-protect tab in the direction of the arrow (see illustration below) to open the slot. To enable recording, close the slot.

Record-protect tab

Slide in the direction of arrow

zYou can play the tracks you have just recorded

Press 7 or AMS immediately after stopping recording.

The recorder starts to play from the first track of the material just recorded.

zYou can play from the first track of the MD after recording 1 Press x again after stopping recording.

2 Press 7

The recorder starts to play from the first track of the MD.

Notes

•You can’t record over existing material when Shuffle Play (page 32), Program Play (page 33), or Multi-access Play (page 34) has been selected. “Impossible” appears in the display at this time.

Notes on Recording

When “ Protected” is displayed

The MD is record-protected. To record on the MD, slide the tab to close the slot (see “To prevent accidental erasure of the recorded material” on page 19).

When the record-protect slot is closed and recording is possible, “Protected” may be displayed and recording may not be possible. In this case, press z (record) again to enable recording.

When “Din Unlock” flashes

•The digital component selected with the INPUT selector is not connected correctly. Connect the component correctly.

•The selected digital component is not turned on. Turn on the component.

Marking track numbers depends on the program source to be recorded.

•When the CD or MD is a program source and they are recorded through the digital input connector, track numbers are marked similarly with the CD or MD as the program source. However, only one track number may be marked on the recorded portion as below.

-A portion recorded by repeating the same track of the same disc (by one track repeat)

-A portion recorded by continuing the same track number of a different disc

When the MD is the program source, a number for a track of 4 seconds or less may not be marked.

•If the sampling frequency of the input connector changes when the DAT tape is a program source and it is recorded through the digital input connector, track numbers are changed automatically.

When TOC indicator flashes

Do not turn off the recorder, disconnect the AC power, or move the recorder when recording on the MD because the recording will be lost. If you turn off the recorder or disconnect the AC power immediately after recording, the recording will be lost.

When PLAY MODE is “PROGRAM,” “SHUFFLE,” or “M.ACCESS” (pages 32, 33, 34)

PLAY MODE changes automatically to “CONTINUE” and recording pauses.

When ”Cannot Copy” flashes

The mini-disc recorder conforms to the Serial Copy Management System. MDs recorded through the digital input connector cannot be copied to other MDs through the digital output connector (page 61).

Recording on MDs

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents MDS-E10 For customers in Canada For customers in the EuropeOwner’s Record On cleaning PrecautionsOn safety On power sourcesAbout This Manual Where to keep thge MDsRegular maintenance Handling MDsTable of Contents Location and Function of Parts Front Panel Descriptions Rear Panel Descriptions Remote Descriptions @Á x stop button Location and Function of Parts ¥ M.SCAN button» Scroll button @¼ Clear buttonDisplay Window Descriptions When you insert an MD Using the Display WindowWhile the recorder is stopped While the recorder is playing While the recorder is recordingE a M 2 Tr 1 m 2 5 s Inserting batteries into the remote Getting Started After UnpackingHooking Up the Audio Components XWhen connecting with mixerGetting Started MD recorderRecording on an MD When TOC indicator flashes When you pause recordingWhen Protected is displayed When Din Unlock flashesDo steps 1 to 5 of Recording on an MD on Press MENU/NO twice Recording for long timesMenu / no YES Level / Display / Char AMS Adjusting the Recording LevelRecording Tips Monitoring the input signal InputErasing blank portions automatically Smart Space/Auto Cut Marking track numbers manually Manual Track Marking Marking Track Numbers While Recording Track MarkingMarking track numbers automatically Automatic Track Marking To stop Time Machine Recording Do steps 1 to 7 of Recording on an MD onIf the CD player doesn’t start playing Do steps 1 to 6 of Recording on an MD on Press Music SyncTo stop Music Synchro-recording Press CD-SYNC StartPress To change Change Recorder to CD player to CD-SYNCHRO StartOperations you may want to do during play Press or turn Playing MDsPlaying MDs To go to Do the following Playing a Specific TrackLocating a track with AMS Playing a track by entering the track Number ZLocating a point while monitoring Sound Search X t N o N a m e 6 Tr 3 m 2 8 sLocating a Particular Point in a Track Reserving the next track during play Next Track PlayRepeating all the tracks on the MD Repeat All Play Z When the play mode is Recorder repeatsPlaying Tracks Repeatedly Repeat Play Repeating the current track Repeat 1 Play ZPress H Playing Tracks in Random Order Shuffle Play ZContinue playing the track or use M to locate To stop Repeat A-B PlayChecking the order of tracks Program 1 0 0 / 3 S 1 2 m 2 7 sCreating Your Own Program Program Play Programming the tracksStoring the Located Track to Multi-access Play1 - 0 Tr 0 m 0 0 s 1 - 6 Tr 3 m 2 8 sMulti-access play Z M o r i z i n g M.ACCESSChecking the program Press AMS or YES Press MENU/NO Tr 0 m 0 0 s 0 0 fReturning to the Specified Point Locate Play To mark the desired point Mark4 3 s 0 4 f Pausing After Each Track Auto PauseFine adjusting the marked point Rehearsal H e a r s a lAuto Pause and Auto Cue Making Track Play Start Soon Auto CueChanging Playback Speed Variable Speed Play 5 % D R E a M 2 Tr 4 m 0 9 sTo select Disc editing Before you start editingRAM editing and Disc editing To select RAM editingAbout indications which appear after Editing Using buttons and control for editing OperationsErasing Tracks Erase About indication which appears during EditingExample Erasing portion B2 of the second track Erasing all tracks on an MD ALL EraseErasing a portion of a track A-B Erase Erasing consecutive tracks Multitrack EraseExample combining the second track and fourth Track Combining Tracks CombineCombining two tracks Combine Combining consecutive tracks Multi track CombineExample Moving the second track after the third track Moving Tracks MoveExample Dividing the second track Dividing Tracks DivideDividing a track after selecting a track Dividing a track after selecting Dividing pointTo enter a space Naming a Track or MD using the controls On the recorderI n T r 2 Naming a Track or MD NameNaming a track or MD using the remote Z Copying the same name to all tracks Disc. Name All Copy Copying names Name CopyTo rename a track or disc name, do the following Renaming a track or MD ZErasing a track or disc name Name Erase Erasing all names on the MD Name All EraseChanging Recorded Level after Recording S.F Edit Undoing the Last Edit UndoChanging the level of a whole track Turn AMS until YES appears on the display To Use Fade In/Fade OutTo force a stop during writing During writing, press x Stop, MENU/NO or ClearFade-in Play and Fade-in Recording Fade in and Fade Out ZFade-out Play and Fade-out Recording Other Functions Control terminal functionsControl terminal CTRL-S Mini-jack type Control functionsPlaying an MD using a timer Using a TimerRecording on an MD using a timer Connecting a keyboard to the MD recorder Setting the keyboardSelecting keyboard type Short cut to the naming procedure Naming a Track or MD Using the KeyboardUsing the Edit Menu Button or function Key Operations using the US or JP keyboardsOperations using the 10-key pad Operating the Recorder Through the KeyboardAssigning a character Assigning Characters to Keyboard KeysClearing key assignments Operating Recorder Using a KeyboardKeyboard Operations English Keyboard Layout Keyboard Operations 10-Keyboard LayoutSystem Limitations Limitations when recording over an existing trackGuide to the serial Copy Management System Trouble shootingMessage code Cause/Remedy Self-Diagnosis FunctionMessage Meaning Display MessagesSpecifications Rack mounting Exterior dimensionsMenu item Function Parameters Factory Setup Menu TableTo access the Setup Menu SettingMenu item Sub item Function Last Mode MemoryTo access the Edit Menu Edit Menu Table
Top Page Image Contents