E n g l i s h
Optional Connections (continued)
Connecting to a Progressive | Connecting to outdoor FM |
Scan TV | antenna terminal |
1
2 1
3 
2
Junction box | FM Antenna |
|
FM pigtail cable
IMPORTANT!
The progressive scan video quality is only possible when usingY Pb Pr and a progressive scan TV is required.
1Use the component video cables (red/ blue/green - not supplied) to connect the Junction Box’s Y Pb Pr sockets to the corresponding component video input sockets (or labelled as Y Pb/Cb Pr/Cr or YUV) on the TV.
2To hear the TV channels through this DVD system, connect the audio cables (white/red) from the Junciton Box to the corresponding AUDIO OUT sockets on the TV.
●Do not connect the video cable from Junction Box to your TV.
3Proceed to pages 18~19 for detailed Progressive Scan set up.
If the FM reception is poor, you can use an FM coaxial cable (not supplied) to connect the FM 75Ω coaxial cable hidden inside the back cover to the outdoor FM antenna terminal.
1Open the main DVD system’s back cover by lifting up the cover from the bottom.
2Unplug the FM pigtail antenna from the FM 75Ω coaxial cable.
3Connect the FM 75Ω coaxial cable to one end of the FM coaxial cable which is connected to the outdoor FM antenna terminal.
Helpful Hint:
– Position the antennas as far as possible from your TV,VCR or other radiation source to prevent unwanted interference.
12
12 | 3/3/05, 3:42 PM 3139 115 2xxx1 |