Philips HTS8000S/69 user manual Not able to select some Items in the setup/system menu

Page 45

Troubleshooting (continued)

Problem

Not able to select some Items in the setup/system menu.

The DVD system does not start playback.

No surround sound effect from the SonoWave speakers system.

Radio reception is poor.

The remote control does not function properly.

Unable to play DivX movies.

The DVD system does not work.

The disc in the disc slot cannot be ejected.

Solution

Press STOP button twice before selecting the setup/system menu.

Depending on the disc availability, some menu items cannot be selected.

Insert a readable disc with the playback side facing down. The DVD+R/CD-R must be finalised.

Check the disc type, colour system (PAL or NTSC) and region code.

Check for any scratches or smudges on the disc.

Press SETUP MENU to turn off the setup menu screen.

You may need to enter the password in order to change the parental control rating level or to unlock the disc for playback.

Moisture may have condensed inside the system. Remove the disc and leave the system turned on for about an hour.

Press SURR button to select a correct surround sound setting.

Make sure the source you are playing is recorded or broadcast in surround sound (DTS, Dolby Digital, etc.).

If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

Increase the distance between the system and your TV or VCR.

Tune in to the correct frequency.

Place the antenna further away from any equipment that may be causing the interference.

Select the source (DISC or TUNER, for example) before pressing the function button (É, S, T).

Reduce the distance between the remote control and the system.

Replace the batteries with new ones.

Point the remote control directly toward the IR sensor.

Check that the batteries are loaded correctly.

Check that the DivX file is encoded in ‘Home Theatre’ mode with DivX 5.x encoder.

Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try to operate again as usual.

Hold down the STOP button on the remote, followed by pressing number button “2”,“5” and “9”.

E n g l i s h

Need Help? Visit us at www.philips.com/support

45

001-047-hts8000s-98-Eng4

45

3/3/05, 3:47 PM 3139 115 2xxx1

Image 45
Contents Need help fast? For Customer Use LaserEnglish IndexContents Locking/Unlocking the disc TroubleshootingAccessories supplied SetupCleaning discs General InformationWhen placing the SonoWave speakers system, ensure that System PlacementFor SonoWave speakers system setting, see Positioning for best effectTo adjust the volume level of AV subwoofer, see Placing the AV subwoofer Placing the main DVD systemPlacing the Junction Box To TV Overall Connection OverviewOptional Setup Mounting the main DVD system on the wallUse the supplied screws to secure the bracket onto the wall Rotate the stand at 180 degrees and tighten the screws Connecting to a Progressive Optional ConnectionsScan TV Antenna terminal Audio/video device Device Connecting to an analogueRemote Control Source indicator@ TV VOL + £ Numeric Keypad ¡ VOL +ECO Power indicator Main UnitDisc slot System display panel Switching on the DVD system Preparing the remote controlUsing the remote control to operate the system Switching to Eco Power standby modePress Source button until Disc appears on the display panel Setting the TVIf no picture Below menu will appear on the TVPAL TV DisplayNtsc Pan ScanRepeat steps 3~4 for other settings Disc mode, press Setup Menu Press 2 to select General SetupOn-screen display OSD language Use 34 keys to select a language and press OK to confirmPlayable discs Disc OperationsRegion Codes Your DVD home theatre system will playAuto Eco Power standby mode Playing discsBasic playback controls To select a playback feature or item Using the Disc MenuTo access or remove the menu Selecting various repeat/ shuffle functionsViewing playback information To cancel the resume modeResuming playback from the last stopped point ZoomingChanging sound track language For VCDs with Playback Control PBC feature version 2.0 onlyFor VCD changing the audio channel Changing subtitle language DVD onlyPlaying an MP3/JPEG/MPEG-4 disc Disc menu appears on the TV screenPlaying MP3 music and Jpeg picture simultaneously Preview Function Playing a picture disc slide showZoom picture Rotating/Flipping the picturePlaying a DivX disc Playing a Super Audio CD SacdAccessing General Setup DVD Setup Menu OptionsProgramming disc tracks not for Picture CD/MP3/SACD Locking/Unlocking the disc for viewingDivX VOD registration code OSD LanguageScreen Saver turning on/off Night Mode turning on/off Accessing Audio SetupSetting the analogue output CD UpsamplingTV Type Accessing Video SetupProgressive function turning on/off TV DisplayPicture Setting Accessing Preference Setup Audio, Subtitle, Disc MenuRestricting playback by Parental Control PBC Playback Control Rating explanationsMP3/JPEG Menu turning on/off Without MenuChanging the Password Setting the DivX Subtitle font Restoring to original settingsOthers Presetting radio stations Tuning to radio stationsUsing the Plug and Play For first time setup, press Source to select Tuner modeDeleting a preset radio station Selecting a preset radio stationChanging tuning grid not available Automatic presettingSpeakers SonoWave speakers system adjustment Sound and Volume ControlsVolume control AV subwoofer adjustmentTo turn off the volume temporarily Selecting surround soundUsing the remote to operate your ‘Philips’ television Setting the Sleep timerOther Functions Dimming system’s displayAmplifier Section SpecificationsTroubleshooting ProblemSolution Not able to select some Items in the setup/system menu Glossary Glossary