Philips HTS8000S/69 user manual Troubleshooting, Problem, Solution

Page 44

E n g l i s h

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

No power.

No picture.

Completely distorted picture or black/white picture.

The aspect ratio of the screen cannot be changed even though you have set the TV display.

No sound or distorted sound.

Cannot activate some features such as Angles, Subtitles, or multi-language Audio.

Solution

Check if the AC power cord is properly connected.

Press the STANDBY ON on the front of the DVD system to turn on the power.

Refer to your TV’s manual for correct Video In channel selection. Change the TV channel until you see the DVD screen.

Press SOURCE to select disc mode.

If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see pages 18~19 for proper progressive scan set up or deactivate the progressive scan feature as below:

1)Turn off your TV progressive scan mode or turn on to interlaced mode.

2)Press EJECT on the main DVD system.

3)Press 1 on the remote control.

4)Press SUBTITLE on the remote control.

If this happens when you are changing the setting of the ‘TV TYPE’, wait for 15 seconds for the auto recovery.

If this happens when you are turning on the progressive scan feature, wait for 15 seconds for the auto recovery.

Check the video connection.

Sometimes a small amount of picture distortion may appear. This is not a malfunction.

Clean the disc.

The aspect ratio is fixed on the DVD disc.

Depending on the TV, it may not be possible to change the aspect ratio.

Adjust the volume.

Check the speaker connections and settings.

Make sure that the audio cables are connected and press the SOURCE button to select the correct input source (TV or AUX/DI, for example) to choose the equipment that you want to hear through the DVD system.

The features may not be available on the DVD.

Changing the language for the sound or subtitle is prohibited on this DVD.

Need Help? Visit us at www.philips.com/support

44

001-047-hts8000s-98-Eng4

44

3/3/05, 3:47 PM 3139 115 2xxx1

Image 44
Contents Need help fast? Laser For Customer UseIndex EnglishContents Troubleshooting Locking/Unlocking the discSetup Accessories suppliedCleaning discs General InformationSystem Placement When placing the SonoWave speakers system, ensure thatFor SonoWave speakers system setting, see Positioning for best effectPlacing the Junction Box To adjust the volume level of AV subwoofer, seePlacing the AV subwoofer Placing the main DVD system Overall Connection Overview To TVUse the supplied screws to secure the bracket onto the wall Optional SetupMounting the main DVD system on the wall Rotate the stand at 180 degrees and tighten the screws Scan TV Antenna terminal Connecting to a ProgressiveOptional Connections Connecting to an analogue Audio/video device Device@ TV VOL + Remote ControlSource indicator ¡ VOL + £ Numeric KeypadDisc slot System display panel ECO Power indicatorMain Unit Preparing the remote control Switching on the DVD systemUsing the remote control to operate the system Switching to Eco Power standby modeSetting the TV Press Source button until Disc appears on the display panelBelow menu will appear on the TV If no pictureTV Display PALNtsc Pan ScanDisc mode, press Setup Menu Press 2 to select General Setup Repeat steps 3~4 for other settingsOn-screen display OSD language Use 34 keys to select a language and press OK to confirmDisc Operations Playable discsRegion Codes Your DVD home theatre system will playBasic playback controls Auto Eco Power standby modePlaying discs Using the Disc Menu To select a playback feature or itemTo access or remove the menu Selecting various repeat/ shuffle functionsTo cancel the resume mode Viewing playback informationResuming playback from the last stopped point ZoomingFor VCDs with Playback Control PBC feature version 2.0 only Changing sound track languageFor VCD changing the audio channel Changing subtitle language DVD onlyPlaying MP3 music and Jpeg picture simultaneously Playing an MP3/JPEG/MPEG-4 discDisc menu appears on the TV screen Playing a picture disc slide show Preview FunctionZoom picture Rotating/Flipping the picturePlaying a Super Audio CD Sacd Playing a DivX discDVD Setup Menu Options Accessing General SetupProgramming disc tracks not for Picture CD/MP3/SACD Locking/Unlocking the disc for viewingScreen Saver turning on/off DivX VOD registration codeOSD Language Accessing Audio Setup Night Mode turning on/offSetting the analogue output CD UpsamplingAccessing Video Setup TV TypeProgressive function turning on/off TV DisplayPicture Setting Restricting playback by Parental Control Accessing Preference SetupAudio, Subtitle, Disc Menu Rating explanations PBC Playback ControlMP3/JPEG Menu turning on/off Without MenuOthers Changing the Password Setting the DivX Subtitle fontRestoring to original settings Tuning to radio stations Presetting radio stationsUsing the Plug and Play For first time setup, press Source to select Tuner modeSelecting a preset radio station Deleting a preset radio stationChanging tuning grid not available Automatic presettingSound and Volume Controls Speakers SonoWave speakers system adjustmentAV subwoofer adjustment Volume controlTo turn off the volume temporarily Selecting surround soundSetting the Sleep timer Using the remote to operate your ‘Philips’ televisionOther Functions Dimming system’s displaySpecifications Amplifier SectionSolution TroubleshootingProblem Not able to select some Items in the setup/system menu Glossary Glossary