DVD Setup Menu Options (continued)
English
Accessing Video Setup Page
1In disc mode, press SETUP MENU.
2Press 1 2 to select ‘Video Setup Page.’
3Press OK to confirm.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
Black Level
Closed Captions
TV Type
This menu contains the options for selecting the color system that matches the connected TV. For details, see page 23.
TV Display
This menu contains the options for setting the aspect ratio of the DVD system according to the connected TV. For details, see page 23.
Progressive function - turning on/off
In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD system’s Y Pb Pr jacks to your TV that supports the progressive video input. Otherwise, the image may not appear or will be distorted. For proper progressive scan set up, see pages 21~22.
IMPORTANT!
Before enabling the progressive scan function, you must ensure :
1)Turn on your TV progressive scan function (refer to your TV owner’s manual.)
2)You have connected the DVD system to your TV using Y Pb Pr (see page 14.)
1 In ‘Video Setup Page,’ use 34 keys to highlight { Progressive, } then press 2.
{ Off }
Select this to disable progressive scan function.
{ On }
Select this to enable progressive scan function.
2Use 34 keys to select a setting and press OK to confirm.
➜Follow the instructions shown on the TV to confirm the selection (if any.)
➜If a blank/distorted TV screen appears, wait for 15 seconds for the auto recovery.
TIPS: The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP MENU.
36
36 | 7/2/05, 10:21 AM 3139 115 2xxx1 |