Sound and Volume Controls (continued)
AV subwoofer adjustment
You can adjust the AV subwoofer output level to enhance the bass output.
1Start playing a music disc that has lots of
2Press VOL +/- to select the desired bass level.
➜ If the volume control is not used within five seconds, it will resume its normal volume control function.
Selecting surround sound
●Press SURR (SURROUND) to select :
➜The availability of the various surround sound modes depends on the sound available on the disc.
➜The available output modes for Multi- channel include: Dolby Digital, DTS (Digital Theater Systems) Surround and Dolby Pro Logic II.
➜Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode.
However, mono (single channel sound) sources will not produce any sound from the surround speakers.
Helpful Hint:
–You are not able to select the surround sound mode if the system setup menu is turned on.
Selecting digital sound effects
Select a preset digital sound effects that matches your disc’s content or that optimizes the sound of the musical style you are playing.
●Press SOUND to select the available sound effect.
When playing movie discs or in TV mode, you can select :
CONCERT, DRAMA,ACTION or
When playing music discs or while in TUNER or AUX/DI mode, you can select : ROCK, DIGITAL, CLASSIC or JAZZ.
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
Volume control
●Adjust VOLUME control (or press VOL +/- on the remote) to increase or decrease the volume level.
➜ "VOL MIN" is the minimum volume level and “VOL MAX” is the maximum volume level.
To turn off the volume temporarily
●Press MUTE on the remote.
➜Playback will continue without sound and "MUTE" appears.
➜To restore the volume, press MUTE again, or increase the volume level.
E n g l i s h
45
45 | 7/2/05, 10:22 AM 3139 115 2xxx1 |