Philips HTS8000S/37 user manual Troubleshooting, Problem, Solution

Page 48

E n g l i s h

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

No power.

No picture.

Completely distorted picture or black/white picture.

The aspect ratio of the screen cannot be changed even though you have set the TV display.

No sound or distorted sound.

Cannot activate some features such as Angles, Subtitles, or multi-language Audio.

Solution

Check if the AC power cord is properly connected.

Press the STANDBY ON on the front of the DVD system to turn on the power.

Refer to your TV’s manual for correct Video In channel selection. Change the TV channel until you see the DVD screen.

Press SOURCE to select disc mode.

If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see pages 21~22 for proper progressive scan set up or deactivate the progressive scan feature as below:

1)Turn off your TV progressive scan mode or turn on to interlaced mode.

2)Press EJECT on the main DVD system.

3)Press 1 on the remote control.

4)Press SUBTITLE on the remote control.

If this happens when you are changing the setting of the ‘TV TYPE’, wait for 15 seconds for the auto recovery.

If this happens when you are turning on the progressive scan feature, wait for 15 seconds for the auto recovery.

Check the video connection.

Sometimes a small amount of picture distortion may appear. This is not a malfunction.

Clean the disc.

The aspect ratio is fixed on the DVD disc.

Depending on the TV, it may not be possible to change the aspect ratio.

Adjust the volume.

Check the speaker connections and settings.

Make sure that the audio cables are connected and press the SOURCE button to select the correct input source (TV or AUX/DI, for example) to choose the equipment that you want to hear through the DVD system.

The features may not be available on the DVD.

Changing the language for the sound or subtitle is prohibited on this DVD.

48

001-053-hts8000-37-Eng14a

48

7/2/05, 10:22 AM 3139 115 2xxx1

Image 48
Contents DVD/SACD Home Theater System Guarantees that your date Youll receive notification Returning the enclosed card By registering your productFor Customer Use Only use attachments/accessories Class II equipment symbolSpecified by the manufacturer Use only with the cart, standEnglish FrançaisFor Customer Use Model No. HTS8000S Serial NoEnglish Environmental information EspañolContents Troubleshooting Locking/Unlocking the discSetup Accessories suppliedCleaning discs General InformationSystem Placement When placing the SonoWave speakers, ensure thatFor SonoWave speakers setting, see Positioning for best effectTo adjust the volume level of AV subwoofer, see Placing the AV subwoofer Placing the main DVD systemPlacing the Junction Box Overall Connection Overview Red label White labelOptional Setup Mounting the main DVD system on the wallUse the supplied screws to secure the bracket onto the wall Mounting the SonoWave speakers on the wall Connecting to a Progressive Optional ConnectionsScan TV Antenna jack TV Connecting to outdoor FM antenna terminal Connecting to an analog Audio/video device DeviceECO Power indicator Main UnitDisc slot System display panel Remote Control Source indicator@ TV VOL + Mutes or restores the volume Disc selects a subtitle languageDisc displays the current status or disc information ¡ VOL +Switching on the DVD system Using the remote control toSwitching to Eco Power standby mode Getting StartedSetting the TV Press Source button until Disc appears on the display panelWait for 15 seconds for the auto recovery Below menu will appear on the TVIf no picture PAL NtscPan Scan MultiAudio, Subtitle and Disc menu LanguagesOn-screen display OSD language Disc Operations Playable discsRegion Codes Your DVD home theater system will playAuto Eco Power standby mode Playing discsBasic playback controls Using the Disc Menu To select a playback feature or itemTo access or remove the menu Selecting various repeat/ shuffle functionsTo cancel the resume mode Viewing playback informationResuming playback from the last stopped point ZoomingFor VCDs with Playback Control PBC feature version 2.0 only Changing sound track languageFor VCD changing the audio channel Changing subtitle language DVD onlyPlaying an MP3/JPEG/MPEG-4 disc Disc menu appears on the TV screenPlaying MP3 music and Jpeg picture simultaneously Playing a picture disc slide show Preview FunctionZoom picture Rotating/Fliping the picturePlaying a Super Audio CD Sacd Playing a DivX discDVD Setup Menu Options Accessing General SetupProgramming disc tracks not for Picture CD/MP3/SACD Locking/Unlocking the disc for viewingOSD Language Screen Saver turning on/offDivX VOD registration code Accessing Audio Setup Night Mode turning on/offSetting the analog output CD UpsamplingAccessing Video Setup TV TypeTV Display Progressive function turning on/offPicture Setting Black Level turning on/off Closed Captions turning on/offAccessing Preference Setup Audio, Subtitle, Disc MenuRestricting playback by Parental Control Rating explanations PBC Playback ControlMP3/JPEG Menu turning on/off Without MenuChanging the Password Setting the DivX Subtitle font Restoring to original settingsOthers Tuning to radio stations Presetting radio stationsUsing the Plug and Play For first time setup, press Source to select Tuner modeSelecting a preset radio station Deleting a preset radio stationAutomatic presetting All your former presets will be overriddenSound and Volume Controls Speakers SonoWave speakers adjustmentAV subwoofer adjustment Volume controlTo turn off the volume temporarily Selecting surround soundSetting the Sleep timer Using the remote to operate your ‘Philips’ televisionTo cancel the sleep timer Other FunctionsSpecifications Amplifier SectionTroubleshooting ProblemSolution DVD system does not start playback Glossary Glossary Philips Limited Warranty 001-053-hts8000-37-Eng14a 05, 1022 AM 3139 115