Philips HTS3548W/55 user manual Setting the speakers’ channels, Press, Use, Delay and press

Getting Started (continued)

English

Setting the speakers’ channels

You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup.

Before you start...

Stop the disc playback by pressing STOP button twice or remove the disc from the disc tray. Otherwise, the settings are not accessible.

A In disc mode, press SETUP on the remote control.

B Press	repeatedly to select { Audio
Setup Page }.
C Press	to highlight { Speakers
Volume } and press .
Audio Setup Page
Speakers Volume
Speakers Delay
HDMI Audio
CD Upsampling Speakers Level Setup
Audio Sync		Front Left	0dB
		Front Right	0dB
		Center	0dB
		Subwoofer	0dB
		Rear Left	0dB
		Rear Right	0dB

D Use keys to set the volume level for each speaker (-6dB ~ +6dB) and press OK to confirm.

E Use	keys to highlight { Speakers
Delay } and press .
Audio Setup Page
Speakers Volume
Speakers Delay
HDMI Audio
CD Upsampling
Audio Sync	Speakers Distance Setup
	Center	0ms
	Rear Left	0ms
	Rear Right	0ms
F Use	keys to set the delay times

(0 ms ~ 15 ms) for centre and rear speakers that best suit your surround sound needs.

G Press OK to confirm.

Helpful Hints:

–A 1ms increase/decrease of delay time is equivalent to 30 cm change in distance.

–Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

–The test tone will be automatically generated to help you judge the sound level of each speaker.

24