Additional Information, Update software | Philips BDP2700 instruction

[Software Update]

Update the software of this player (if a latest version is available on Philips website) to enhance the performance of this player.

•[USB] - Update software from the USB device which is connected to this player.

•[Network] - Update software from the internet.

Note

•For detailed software updating, see “Additional information” > “Update software”.

[Clear Memory]

Delete BD-Live data that are automatically downloaded on the connected USB device.

Tip

•On the connected USB device, a folder named “BUDA” is automatically created to store the downloaded BD- Live data.

[DivX® VOD Code]

Obtain the DivX® registration code or the deregistration code.

Tip

•Use this player’s DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.

[Version Info.]

Display the software version and the MAC address of this player.

Tip

•This information is needed for you to check if a latest software version is available at the Philips website so that you can download and install on this player.

[Restore Default Settings]

Reset all the settings of this player to the factory settings, except for [Parental Control] setting.

7 Additional Information

Update software

For software updates to enchance performance, check the current software version of this player to compare with the latest software (if available) at the Philips website.

1Press .

2Select [Setup], and press OK.

3Select [Advanced] > [Version Info.], and press OK.

Update software via network

1Set up the internet connection (see “Get started’ > “Set up a network”).

2In the Home menu, select [Setup] > [Advanced] > [Software Update] > [Network].

»You are prompted to start upgrading process if upgrade media is detected.

3Follow the instructions on the TV screen to conﬁrm update operation.

»When the software update is complete, the player automatically turns off and on again.

Update software via USB

1Go to www.philips.com/support to check if the latest software version is available for this player.

2Download the software into a USB ﬂash drive: a Un-zip the download, and make sure that the un-zipped folder is named “UPG”.

bPut the “UPG” folder in the root directory.

3Insert the USB ﬂash drive to the (USB) jack on this player.

4In the Home menu, select [Setup] > [Advanced] > [Software Update] > [USB].

5Follow the instructions on the TV screen to conﬁrm update operation.

»When the software update is complete, the player automatically turns off and on again.

Note

•Do not turn off the power or remove the USB ﬂash drive when software updating is in progress to prevent possible damage of this player.

English

EN 21