Philips DCD322/12 user manual Select the correct TV system, Change system menu language

•Go to the lowest channel on your TV, then press the Channel Down button until you see the blue screen.

•Press the source button repeatedly on the remote control of your TV.

Tip

•The video-in channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO etc. See the TV user manual on how to select the correct input on the TV.

Select the correct TV system

Change this setting if the video does not appear correctly. By default, this setting matches the most common setting forTVs in your country.

1Press SYSTEM MENU.

2Select [Video Setup].

3Select [TV System] and then press .

4Select a setting and then press OK.

•[NTSC] - For TV with NTSC color system.

•[PAL] - For TV with PAL color system.

•[Multi] - For TV that is compatible with both PAL and NTSC.

5To exit the menu, press SYSTEM MENU.

Change system menu language

1Press SYSTEM MENU.

2Select [General Setup].

3Select [OSD language] and then press .

4Select a setting and then press OK.

5To exit the menu, press SYSTEM MENU.

Turn on Progressive Scan

Progressive scan displays twice the number of frames per seconds than interlaced scanning (ordinaryTV system).With nearly double the number of lines, progressive scan offers higher picture resolution and quality.

Before you turn on this feature, ensure that:

•The TV supports progressive scan signals.

•You have connected this unit with the TV through component video.

1Turn on the TV.

2Ensure that the TV progressive scan mode is deactivated (see the TV user manual).

3Switch the TV to the correct viewing channel for this unit.

4Press DISC.

5Press SYSTEM MENU.

6Press/to select [Video Setup] in the menu, then press .

7Select [Component Video], then press

.

8Select [P-Scan], then press OK.

» The progressive setup is complete.

14EN