Philips 721VR To set the colour system, TV with RF Antenna Input only, Turn on DVD+VCR and TV

To set the colour system

1 Press SYSTEM MENU.

2 The main menu will appear on the TV screen.

3 Press 1 or 2 to select the SYSTEM and press OK.

4 Press 3 or 4 to select according to the COLOUR system used.

	P AUTO		1 2	SYS-	VCR
			TIME
REC	RSET	Pr-12			Dr.TEM
		ACMS	DATE			SYS-
	PAL
	fOSD		+ -		NIC	TEM
	MESECAM					i
AUDIO	ON	16:9	DECO-	OPR
	OFF	4:3	DER

5 Press 1 or 2 to select the RF AUDIO.

Press 3 or 4 to select according to the RF AUDIO used.

	P RF I/I		1 2	SYS-	VCR
			TIME
REC	RSET	Pr-12			Dr.TEM
		ACMS	DATE			SYS-
	RF B/G				NIC
	fOSD		+ -			TEM
	RF D/K		DECO-			i
AUDIO	ON	16:9		OPR
	OFF	4:3	DER

6 Press SYSTEM MENU to remove the menus from the TV screen.

Before Operation - VCR part

TV with RF Antenna Input only

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the DVD+VCR through the RF cable.

If you have used a SCART lead you will not have to tune your TV, simply select the AV channel.

The AV channel is already pre-tuned for optimum video playback on your TV.

Perform the following steps only if interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area, or if you change the connection from RF connection to AV connection, or vise versa.

1 Turn on DVD+VCR and TV.

2 Tune your TV until you see the picture below (refer to your TV owners manual).

￿	￿
	￿

If the picture is snowy, move to step 4.

If the picture is clear, move to step 3 and press 1 on the DVD+VCR to finish.

3 Press OK to start the automatic tuning process.

4 Press 1on the remote control to enter the standby mode (the clock indicator will be dimmed).

5 Press and hold CHANNEL 3 or 4 on the DVD+

VCR for more than 4 secs.

RF 36 will appear in the DVD+VCR display.

The following picture will be displayed on the TV screen.

RF CHANNEL	36
PSET	i
R

6 If the picture is still snowy, press CHANNEL 3 or

4on the DVD+VCR to set the video channel to a vacant position between 22 and 68 which is not occupied by any local station in your area.

Note

The RF channel will not change until step 7 has been executed.

7 Press 1to store the new RF video channel into the DVD+VCR memory.

Now tune your TV set to the new DVD+VCR RF channel.

Note

If the TV picture was clear in step 5, do not retune your TV.

English

13