Operation with DVD and Video CD
Playing a DVD and Video CD
Playback Setup DVD
●Turn on the TV and select the video input source connected to the DVD player.
●Audio system:Turn on the audio system and select the input source connected to the DVD player.
1 Press OPEN/CLOSE to open the disc tray.
2 Load your chosen disc in the tray, with the playback side down.
When a
3 Press OPEN/CLOSE to close the tray.
Playback starts automatically. If playback does not start, press PLAY B.
In some cases, the disc menu might appear instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a DVD or Video CD which offer a menu.
DVD
Use the 1 2 3 4 buttons to select the title/chapter you want to view, then press OK to start playback.
Press TITLE or DISC MENU to return to the menu screen.
VCD2.0
●Use the number buttons to select the track you want to view.
Press RETURN to return to the menu screen.
●Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page 19.
Notes
–If Parental Control is set and the disc is not within the Rating settings (not authorized), the
–DVDs may have a region code.
Your player will not play discs that have a region code different from your player.The region code for this player is 2 (two).
–To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode.
General Features
Note
Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.
Moving to another TITLE DVD |
|
|
|
| 1 /3 |
| |
|
|
| |
|
|
|
When a disc has more than one title, you can move to another title as follows:
●Press DISPLAY, then press the appropriate numbered button
Moving to another CHAPTER/TRACK
DVD | VCD1.1 DivX |
|
|
|
|
|
|
|
|
|
| 1 /12 |
|
|
| 1 /3 |
| ||
|
|
|
|
|
|
|
|
|
|
When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:
●Press S or T briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track.
●Press S twice briefly to step back to the previous chapter/track.
●To go directly to any chapter during DVD playback, press DISPLAY.Then, press 3/4 to select chapter/track icon. Then, enter the chapter/track number using the numbered buttons
Note
For
Search DVD VCD2.0 VCD1.1 DivX
1Press S or T for about two seconds during playback.
The player will now go into SEARCH mode.
2Press S or T repeatedly to select the required speed:
QX2, QX4, QX16, QX100 (backward) or RX2, RX4, RX16, RX100 (forward). With a Video CD, the Search speed changes: QX2, QX4, QX8 (backward) or
RX2, RX4, RX8 (forward).
3To return to playback, press PLAY B.
Still Picture and
1Press PAUSE/STEP during playback. The player will now go into PAUSE mode.
2You can advance the picture
English
25