Philips PM-4S 4 manual Direct Code Entry Code Search, Code Search by Brand

Page 5

Direct Code Entry

Code Search, cont.

1.Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button.

2.Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.

3.Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.

4.With your device on, press CHANNELUP. If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.

Write your codes down here for easy reference later.

Type

Type stored

Code

 

 

 

TV

TV

 

 

 

 

VCR

 

 

 

 

 

DVD

 

 

 

 

 

Cable

 

 

 

 

 

Code Search

If your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps.

1.Manually turn on the device (TV, VCR, etc.) to be controlled.

2.Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button.

3.Press and quickly release the desired mode button (TV, VCR, etc.). The red indicator blinks off once.

4.Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks off with each button press. If you accidentally overshoot the code required, press the CHANNEL DOWN button to backtrack through the library until the device changes channel. Pressing CHANNEL UP changes direction to forward again.

5.Press and release MUTE to install the code.

8

Most users will store VCR codes under the VCR button, Cable codes under CABLE, etc. If (for example) you want to store a VCR code under CABLE, first follow the procedure for Direct Code Entry (previous page) and press CABLE in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search (or Brand Search, below). Note: If the device does not have a CHANNEL UP button, use PLAY (VCR only) or POWER instead. Code Search starts from the currently stored 4 digit number under that mode.

Code Search by Brand

Lets you search for a code for a specific Brand within the Code Library for a particular manufacturer.

1.Turn on the device (TV, VCR, etc.) to be controlled.

2.Press and hold the CODE SEARCH button until the red indicator remains on, then release CODE SEARCH button.

3.Press and quickly release the desired mode button (TV, VCR, etc.). The red indicator blinks off once.

4.Press and release the numeric button (0-9) corresponding to desired Manufacturer (see table on code list sheet). The red indicator blinks off once. Note, pressing “0” performs a full library search same as normal Code Search Method on previous page.

5.Press the CHANNEL UP button ((or POWER or PLAY (VCR only)) repeatedly until the device to be controlled changes channel. The red indicator blinks off with each button press. If you accidentally overshoot the code required, press the CHANNEL DOWN button to backtrack through the library until the device changes channel. Pressing CHANNEL UP changes direction to forward again.

6.Press and release MUTE to install the code.

Brand Search Method entry is now complete.

Note: When all codes under a Brand have been searched the red indicator flashes rapidly for 3 seconds.

9

Page 4 Page 6
Image 5
Page 4 Page 6
Contents PM4S Introduction Table of ContentsRECORD, PLAY, STOP, REW, FF, Pause Button Functions Button Functions,DVD Functions SetupCode Search by Brand Direct Code Entry Code Search,Code Search Setup, Code Identification FeatureSleep Timer VCR/DVD/DVR Punch-Through Feature Limited Lifetime Warranty TroubleshootingIntroducción ÍndiceDVD Funciones de botonesInstalación de baterías PreparaciónAhorrador de baterías Fijación de códigosIngreso Directo de Códigos Preparación,Programacíon con Búsqueda de codigos Code Search Búsqueda de Códigos por MarcasCronometro de apagado automático Función de Identificación de CódigosCódigos de programación de equipos combinados Control de equipos combinadosFunción de traspaso de VCR/DVD/DVR Control de volumen/silencio y traspasoEl Control Remoto no Opera Algunas Funciones de su Aparato El Control Remoto no Opera su ProductoProgrammation des codes Saisie des codes Table des matièresRECORD, PLAY, STOP, REW, FF, Pause Fonctions des touches,Installation des piles ConfigurationÉconomiseur de piles Programmation des codesRecherche de code par marque Configuration suiteSaisie directe des codes Minuteur de mise en veille Fonction d’identification des codesProgrammation des combinés Contrôle des combinésAccès direct aux modes VCR/DVD/DVR Commande Volume/Mute et fonction d’accès directLe témoin clignote une fois le code programmé DépannageGarantie a vie limitée Trilingual Back Cover Art

PM-4S 4 specifications

The Philips PM-4S is a cutting-edge professional audio monitoring speaker designed for audio engineers, music producers, and sound technicians who require precision in their sound reproduction. With its sleek design and advanced technologies, the PM-4S serves as a reliable tool for critical listening in both studio and live sound environments.

One of the standout features of the PM-4S is its bi-amp design which utilizes a dedicated power amplifier for both the woofer and tweeter. This dual amplification system enhances clarity and reduces distortion, ensuring that every element of a mix is reproduced accurately. The speaker's frequency response spans from 38 Hz to 42 kHz, providing an impressive range that captures both deep bass and sparkling highs without compromising on detail.

The PM-4S employs a robust 10-inch woofers crafted from high-quality composite materials, which not only enhances durability but also improves transient response. Paired with a 1-inch soft dome tweeter, the PM-4S achieves a balanced sound profile, making it an ideal choice for genres ranging from classical to electronic. The speaker's wide dispersion pattern ensures that sound is evenly distributed across the listening environment, minimizing the impact of room acoustics.

Another notable technology incorporated into the PM-4S is its innovative bass reflex system. This design feature optimizes the low-frequency response, enabling the speaker to handle powerful bass without distortion. This characteristic is essential for those working in genres where bass prominence is crucial.

Personalization is also a strong suit of the PM-4S; the speakers are equipped with adjustable EQ settings that allow users to tailor the sound to match their specific studio environment or personal preferences. This level of customization is particularly beneficial in professional settings, where different projects may require distinct auditory characteristics.

In summary, the Philips PM-4S is a professional-grade audio monitoring solution that excels in clarity, accuracy, and versatility. Its bi-amplified design, high-quality construction, and user-friendly adjustments make it a valuable asset for any audio professional dedicated to achieving the highest sound quality in their work. With the PM-4S, users can elevate their audio production standard, ensuring that each mix translates effectively across various playback systems.
Top Page Image Contents