Philips PM-4S 4 manual VCR/DVD/DVR Punch-Through Feature

Page 7

Setup, cont.

Controlling Devices Requiring Separate Power On and Off Buttons, cont.

To turn the TV off, press and release the POWER button to transmit the Power Off button command. This method can be applied similarly to any device and is available for all Modes. Note this feature is not supported by all codes.

VCR/DVD/DVR Punch-Through Feature

This remote allows the 6 VCR transport buttons (i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC) to Punch-Through control from any Mode programmed with TV, SAT or Cable codes to the last VCR, DVD or DVR programmed Mode you used. Normally other types of remotes only punch-through (from another Mode) on the 6 VCR buttons to the device programmed under the VCR Mode button. This is not much use if you are using a DVD programmed under a Mode other than VCR. For example, if you have 2 DVD, VCR or DVR devices programmed into this remote, the last one you accessed on the remote will be the one that has control of the 6 VCR transport buttons when in any other Mode. This feature will not operate if the programmed TV, SAT or Cable code has its own VCR transport button control e.g. a TV Combo, SAT/PVR, etc.

Volume/Mute Control and Punch-Through Feature

This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set (factory default) for all device Modes programmed with “Visual” codes (e.g. TV, VCR, DVD, DVR, SAT & CABLE) and “Audio” codes (e.g. CD & AUDIO) to use their own Volume/Mute control if present. If the programmed “Visual” code has no Volume/Mute operation of its own then those buttons will punch- through control to the TV Mode device without needing to change to TV Mode. Please refer to the next page for more information.

Setup, cont.

Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function or the Volume/Mute buttons will do nothing.

SettingALLVolume/Mute Control to any one Mode

This routine can set all Modes to “punch-through” to any one chosen Mode for Volume/Mute button control without the needing to change to that Mode.

1.Press and hold the CODE SEARCH button until the red indicator turns on, then release the button.

2.Press and hold the MUTE button until the red indicator blinks off, then release the button.

3.Press and release the desired Mode button (TV, VCR, etc.) for Volume/Mute control, the red indicator blinks then stays on.

4.Press and release the MUTE button and the red indicator turns off. The red indicator will blink rapidly for three seconds if the Mode you have selected has no Volume/Mute control.

5.All other Modes will now punch-through to your chosen Mode for Volume/Mute control.

6.All “Visual” and “Audio” programmed Modes will now punch-through to the respective Modes you have chosen for Volume/Mute control.

Setting any Mode to use its own Volume/Mute Control

This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/ Mute buttons will do nothing.

1.Press and hold the CODE SEARCH button until the red indicator turns on, then release the button.

2.Press and hold the MUTE button until the red indicator blinks off, then release the button.

3.Press and release the desired Mode button (TV, VCR, etc.), the red indicator blinks then stays on.

4.Press and release the VOLUME- (Down) button, the red indicator blinks then stays on.

5.Press and release the MUTE button and the red indicator turns off.

6.All “Visual” and “Audio” programmed Modes will now punch-through to the respective Modes you have chosen for Volume/Mute control.

12

13

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PM4S Introduction Table of ContentsRECORD, PLAY, STOP, REW, FF, Pause Button Functions Button Functions,DVD Functions SetupCode Search Direct Code Entry Code Search,Code Search by Brand Sleep Timer Code Identification FeatureSetup, VCR/DVD/DVR Punch-Through Feature Limited Lifetime Warranty TroubleshootingIntroducción ÍndiceDVD Funciones de botonesFijación de códigos PreparaciónInstalación de baterías Ahorrador de bateríasBúsqueda de Códigos por Marcas Preparación,Ingreso Directo de Códigos Programacíon con Búsqueda de codigos Code SearchControl de equipos combinados Función de Identificación de CódigosCronometro de apagado automático Códigos de programación de equipos combinadosFunción de traspaso de VCR/DVD/DVR Control de volumen/silencio y traspasoEl Control Remoto no Opera Algunas Funciones de su Aparato El Control Remoto no Opera su ProductoProgrammation des codes Saisie des codes Table des matièresRECORD, PLAY, STOP, REW, FF, Pause Fonctions des touches,Programmation des codes ConfigurationInstallation des piles Économiseur de pilesSaisie directe des codes Configuration suiteRecherche de code par marque Contrôle des combinés Fonction d’identification des codesMinuteur de mise en veille Programmation des combinésAccès direct aux modes VCR/DVD/DVR Commande Volume/Mute et fonction d’accès directGarantie a vie limitée DépannageLe témoin clignote une fois le code programmé Trilingual Back Cover Art

PM-4S 4 specifications

The Philips PM-4S is a cutting-edge professional audio monitoring speaker designed for audio engineers, music producers, and sound technicians who require precision in their sound reproduction. With its sleek design and advanced technologies, the PM-4S serves as a reliable tool for critical listening in both studio and live sound environments.

One of the standout features of the PM-4S is its bi-amp design which utilizes a dedicated power amplifier for both the woofer and tweeter. This dual amplification system enhances clarity and reduces distortion, ensuring that every element of a mix is reproduced accurately. The speaker's frequency response spans from 38 Hz to 42 kHz, providing an impressive range that captures both deep bass and sparkling highs without compromising on detail.

The PM-4S employs a robust 10-inch woofers crafted from high-quality composite materials, which not only enhances durability but also improves transient response. Paired with a 1-inch soft dome tweeter, the PM-4S achieves a balanced sound profile, making it an ideal choice for genres ranging from classical to electronic. The speaker's wide dispersion pattern ensures that sound is evenly distributed across the listening environment, minimizing the impact of room acoustics.

Another notable technology incorporated into the PM-4S is its innovative bass reflex system. This design feature optimizes the low-frequency response, enabling the speaker to handle powerful bass without distortion. This characteristic is essential for those working in genres where bass prominence is crucial.

Personalization is also a strong suit of the PM-4S; the speakers are equipped with adjustable EQ settings that allow users to tailor the sound to match their specific studio environment or personal preferences. This level of customization is particularly beneficial in professional settings, where different projects may require distinct auditory characteristics.

In summary, the Philips PM-4S is a professional-grade audio monitoring solution that excels in clarity, accuracy, and versatility. Its bi-amplified design, high-quality construction, and user-friendly adjustments make it a valuable asset for any audio professional dedicated to achieving the highest sound quality in their work. With the PM-4S, users can elevate their audio production standard, ensuring that each mix translates effectively across various playback systems.
Top Page Image Contents