Chapter 3: Local Management
3.7.2Ring Map Configuration Screen Commands
The following list describes each of the Ring Map Configuration screen commands:
Address Mode [ ]
The Address Mode command allows the user to switch between canonical and MAC format addresses. To toggle between the two address modes, press the SPACE bar.
SCROLL DOWN n
The Scroll Down n command rotates the ring display, so that the station addresses shift around the ring in a clockwise direction. The n controls the number of shifts downstream of the
SCROLL UP n
The Scroll Up n command rotates the ring display, so that the station addresses shift around the ring in a counterclockwise direction. The n controls the number of shifts upstream of the
NOTE |
When the ring map contains only one station, the SCROLL UP n and SCROLL DOWN n commands do not appear.
3.7.2.1Adjusting the Scroll Number (n)
When using the SCROLL DOWN n or SCROLL UP n commands, the n allows the user to control the number of shifts made with each command execution.
To set the number (n) of scrolls, perform the following steps:
1.Using the ARROW keys, highlight the SCROLL DOWN n or SCROLL UP n command.
2.Press the SHIFT and + keys (to increment) or the SHIFT and - keys (to decrement) until the number of shifts desired displays.
3.Press ENTER. The ring map scrolls n number of shifts.
NOTE |
The scroll number remains the same until it is changed manually, or the Local Management session is terminated.
|
