Cabletron Systems BRIM-F6 manual HSIM-F6 User’s Guide

Chapter 2: Installation

3.Attach the antistatic wrist strap (refer to the instructions outlined on the antistatic wrist strap package).

4.Remove the hub chassis cover (refer to your specific hub documentation for instructions on removing the hub chassis cover).

5.Refer to Figure 2-3and remove the two faceplate mounting screws and the HSIM coverplate. Save the screws.

6.Refer to Figure 2-3and remove the two standoff screws. Save the screws.

7.Place the HSIM behind the hub faceplate.

8.Align the HSIM connector of the HSIM with the pins on the hub.

9.Press down firmly on the back of the HSIM until the pins slide all the way into the HSIM connector holes.

NOTE

Ensure that the standoffs on the hub align with the standoff screw holes on the HSIM.

10.Secure the HSIM-F6 to the module faceplate using the mounting screws saved in step 5.

11.Secure the HSIM-F6 to the module standoffs using the standoff screws saved in step 6.

Ensure that the chassis cover is in place before reconnecting the power cord.

12.Reattach the chassis cover to the hub, reconnect the power cord, and reconnect the hub to the network.

Refer to Chapter 3 for instructions on configuring the HSIM-F6 using Local Management.

2-8 HSIM-F6 User’s Guide