Chapter 3: Local Management
3-26 HSIM-F6 User’s Guide
3.9.3 Configuring the HSIM-F6 for Full Duplex Operation
To configure the HSIM-F6 to operate in full duplex mode, complete the
following steps.
1. Use the arrow keys to highlight the [STANDARD FDDI] field.
2. Use the SPACE bar to toggle between [STANDARD FDDI] and
[FULL DUPLEX].
3. With [FULL DUPLEX] selected, use the arrow keys to highlight the
SAVE command at the bottom of the screen, then press ENTER. The
“Saved OK” message displays indicating that the changes have been
saved to memory.
NOTE [STANDARD FDDI] is the default setting for the SET
OPERATION MODE field of the HSIM-F6.
NOTE When the SAVE command is executed, both ports of the
HSIM-F6 begin operating in full duplex mode.