Instructions for use
N o t e
-The search time averages about 90 seconds. (Maximum search time is 5 minutes for TV and 2 minutes for VCR).
-Autosearch stops automatically after all codes have been tested.
English
MAKE A NOTE OF YOUR CODE!
A d v i c e
Carefully read the complete procedure before starting!
Note the code inside the battery case and in the codelist of this booklet. This may be useful if you ever need to set up the SBC RU220 again. You used the auto search procedure or you forgot to note the code after set up? No problem! You can still ‘read out’ the code from the remote:
1 Make sure you have selected the right mode with the mode selector key.
2 Press and release keys 1 and 6 simultaneously.
Important: after pressing the keys, you have to release them immediately!
– The green LED lights up.
3 Press the the previous program key.
– The green LED goes out.
4 Press key 1 and count the number of times the green LED flashes. This is the first digit of the
5 Press key 2 and count the number of flashes for the second digit.
6 Press key 3 and count the number of flashes for the third digit.
7 Note the code.
5