ENGLISH
4.6 Learning key functions
If you miss certain functions from your original remote control, the SRU 8112 can learn these functions from the original remote control.
Tips on learning key functions
•Only one original remote type should be learned per individual mode.
•First clear all learned functions for a device mode
(TV, DVD, DVDR,VCR, etc.) to make sure there are no previously learned functions for that mode.
For this, refer to ‘Clearing all learned functions for a device mode’ hereafter.
•In ‘Learn’ mode, you will see a red ‘halo’ around the transmit icon at the bottom left of the display.
During learning this ‘halo’ starts flashing.When the ‘halo’ flashes very fast, the IR transmitter (original remote control) and the IR receiver (SRU 8112) are correctly aligned and on proper distance from each other.
To achieve this, gently move the original remote control around, without lifting it up, until the ‘halo’ flashes very fast.The remote controls are then in the right position and should not be moved during learning.
•Note that the IR receiver, used for learning key functions, of the SRU 8112 is located at the bottom of the remote control.
•Some functions of some types of remote control might not be learned.
•When learning, you should normally not release the key being learned until the display prompts you to do so. However, some keys might be learned multiple times if you do this. If this happens, just ’tap’ the key you want to learn, rather than press and hold it. For example, keys that you normally hold down for awhile (like volume up or down) will likely require a long press when learning.
Keys that you normally give a quick press (like the numbers, and channel up/down) will likely require a quick press when learning. If after learning, say, the
•Keep at least 1 metre (3.3 feet) away from incandescent or
16 | Extra possibilities |