ENGLISH
Clearing all learned functions for a device mode
1Press the HOME key and select ‘Setup’ in the ‘Home’ menu.
2Select ‘Advanced’.
3Select ‘Clear Settings’.
4Select ‘Learned’.
5Select the device for which you wish to clear learned functions.
6Select ‘Clear’.
5 Frequently asked questions
In this chapter you find answers to the most frequently asked questions about your universal remote control.
Setup
I cannot enter the ‘Home’ mode.
Battery level too low.
•Replace the old batteries with three new AA batteries. We recommend Philips Alkaline batteries.
How do I set up the remote control for combo devices (TV / VCR,TV / DVD, DVD / VCR, etc)?
Some combo devices require you to set up two different source selection keys to control both parts of the combo device. For example, if you have a TV / DVD combo, you might need to set up the remote control for both TV and DVD to operate your TV / DVD combo.
I cannot find the brand of my device.
Not all brands are available in the data base of the remote control.
•When in ‘Home’ mode (‘Home’,‘Setup’,‘Devices’), select ‘No’ when asked if you know the brand name of your device.The remote control will perform a full database search.This may take up to 5 minutes.
Or:
•Try copying key functions from the original remote control. For this, refer to chapter 4.6 ‘Learning key functions’.
Operation
The remote control does not wake up anymore.
Battery level too low.
•Replace the old batteries with three new AA batteries. We recommend Philips Alkaline batteries.
18 | Frequently asked questions |