Philips SRU8112/27 manual Quickpower, Sleep, Macros, Help

Page 9

Quickpower

Switches the device you wish to operate on / off.

Only devices for which the remote control is set up can be selected.

Select ‘QuickPower’, then select the device to switch on / off.

Sleep

Sets devices to switch off at a preset time.The switch-off time can be set in intervals of 15 minutes. Maximum switch-off time is 90 minutes.

Only devices for which the remote control is set up can be selected.

Select ‘Sleep’, then select the device(s) to set a switch-off time for.

Press the corresponding side key(s) to set the desired switch-off time(s).

Make sure the remote control points at the device(s) you have set a switch-off time for.

Macros

Shows available macros, if macros have already been set up. If no macros are available, you can set up macros here. For this, refer to chapter 4.4 ‘Macros’.

Setup

 

Devices:

allows you to add and delete devices. For this,

 

refer to chapter 4.2 ‘Devices’.

Favorites:

allows you to add, edit, reorder, delete and / or

 

rename favorite channels. For this, refer to

 

chapter 4.3 ‘Favorite channels.

Macros:

allows you to add, edit, delete, rename and / or

 

extend macros. For this, refer to chapter 4.4

 

‘Macros’.

Advanced:

See 4.5 ‘Advanced options’.

Learn:

See 4.6 ‘Learning key functions’.

Help

Gives you extra information on how to set up and use your remote control.

ENGLISH

Extra possibilities

9

Image 9
Contents Register your product Get support at SRU 8112/27 EN Remote controlPage Your universal remote control Installing the remote control Table of contentsDevice name Description Keys and functions Using the remote controlVOL + s 10 SAP Cursor keysScan Play / 2 Scan + REC / 0 Stop / 9 Pause Thumbs downSelecting devices Home menu Extra possibilitiesSleep QuickpowerMacros HelpAdding devices DevicesDeleting devices Favorite channelsOther options Deleting favorite channelsSelecting favorite channels Press the Favorite keySetting up macros Adding macros Select the macro M1, M2, M3, etc. that you wish to editDeleting macros Select ‘Yes’ to delete the macroOptions Advanced optionsDevice codes Punch throughPunchthrough clears punchtrhough settings Clear settingsSelect ‘Save’ KidSafeTips on learning key functions Learning key functionsLearning Repeat steps 4 and 5 to learn other keysLabelling learned keys Clearing all learned functions for a device mode Frequently asked questionsSetup Cannot enter the ‘Home’ mode Operation Remote control does not wake up anymoreVolume and mute keys are not working properly Remote control does not respond to all key commandsNeed help? Can I use rechargeable batteries in the remote control?Only for US One Year Limited Warranty ’MW/RR/RD/1208