8
............ digit keys for direct
channel / track selection.
9
................................ switches the selected device on / off.
Note
For some TV brands / types, this key will only turn off the TV.You will have to press a digit button (direct channel selection) to turn on the TV again.
3.2Resetting a key to its original function
If an improved key (see chapter 2.3.2) still does not function as expected, you can always reset the key to its original function.
1 | In the current |
| ||
| device mode, keep 5 sec. | |||
| digit keys | and | ||
|
| pressed |
|
|
| simultaneously for 5 | |||
| seconds, until the |
| ||
| red Setup light | lights up. | ||
2 | • The remote control is now in setup mode. | |||
Press digit keys | , | |||
|
| , and | , in that | |
| order. |
|
| |
| • | After each key | ||
|
| press the red | ||
|
| Setup light |
| |
3 |
| blinks once. |
| |
Press the key that | ||||
| you wish to reset | |||
| twice. E.g. the 22 | |||
| key. |
| 2 x | |
| • | After each key | ||
|
| press the red | ||
|
| Setup light | blinks once. | |
•The red Setup light 
will blink one more time to confirm that the key was succesfully reset to its original function.
Using the universal remote control English
EN 11
WM_17__Manual_80_210.indd 11 |