How do I set the remote control for combo devices (TV / VCR,TV / DVD, DVD / VCR, etc)? Some combo devices require you to set up two different source selection keys to control both parts of the combo device. For example, if you have a TV / DVD combo, you might need to set up the remote control for both TV and DVD to operate your TV / DVD combo.
Operation
The remote control does not wake up anymore.
Battery level too low or battery lifetime came to an end.
•Replace the batteries. See chapter 2.1.
The device I want to operate does not respond at all / does not respond to all of the key commands.
•Check if the keys you press are available on the original remote control of the device.
•Try improving keys. See chapter 2.3.2.
Wrong code selected during setup.
•Set up the remote control again for the device. Always test if the device responds, before leaving setup mode.
See chapter 2.2.
It may be that the keys that you are trying to use have a different naming on the original remote control.
•Try out all keys to find the one(s) you need.
Service and support English
Batteries
Will my settings be deleted when I replace the batteries?
No. All user settings will be retained in the remote control memory in the remote control memory for 5 minutes.
EN 13
WM_17__Manual_80_210.indd 13 |