Button Functions | Button Functions, cont. |
1.16.
VCR
2.
3.
4.
DVD CBL SAT
POWER SETUP
SLEEP |
|
|
VOL | MUTE | VOL |
|
|
15. |
|
|
14. | 12. | 3. |
13. | 13. | 5. |
5.
6.
7.
INFO
LAST
12.
11.
10.
8. | 9. |
ENTER INPUT
Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds.
Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. LAST may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have LAST ability for the LAST button to operate this feature.
1.Red Indicator Lights when any button is pressed.
2.TV, VCR, DVD, CBL, SAT Selects product to be operated.
3.POWER Turns product On or Off.
4.SLEEP Turns off the TV after a period of 1 to 99 minutes.
5.VOLUME UP/DOWN Changes the volume level of the product, normally the TV.
6.INFO Displays/selects
7.RECORD, PLAY, STOP, REW, FF, PAUSE
VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan
8.ENTER Used after direct channel number entry to immediately change to the selected channel.
9.INPUT For some TVs, press repeatedly to select from available viewing sources (antenna, cable box, VCR, etc.).
10.NUMBERS Enter numbers for direct channel selection. Some products require Enter to be pressed after channel selection.
11.LAST Returns to the previously selected channel, or DVD repeat toggle. EXIT Used to exit menu functions.
12.MUTE Turns off the TV sound while the picture remains. OK Selects menu items for the device you are controlling.
13.CHANNEL UP/DOWN Changes the channels.
14.CC (SUBTITLE) TV Closed Caption (if your TV has this feature) or DVD Subtitle toggle. The Satellite GUIDE is accessed under the CC button when in SHIFT mode.
15.SETUP Used for setup.
16.SHIFT Press to access “shifted” functions (labeled in Green). See page 7.
4 | 5 |
10/9/2006, 2:49 PM