Philips SRU4050 owner manual Button Functions, SAT Functions

Button Functions, cont.

SAT Functions

CHANNEL+ and CHANNEL- buttons perform the “Page+” and “Page-” function for on-screen Guide Menus used by some Satellite systems.

INFO button brings up Satellite Display screen for current Channel and system information.

The Satellite GUIDE is accessed under the CC button when in SHIFT mode.

DVD Functions

FORWARD and REVERSE buttons control the speed of Fast Forward and Reverse Playback respectively. CHANNEL+ and CHANNEL- buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc.

SUBTITLE (CC) button turns the subtitles on or off. REPEAT (LAST) button performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track.

INFO button brings up DVD Display or Control Menu for Chapter/Track/Title number, Time remaining/elapsed indication, system information, etc.

PLAY button is used to start Disc playback and for Menu selection on some DVD players.

STOP button stops Disc playback.

PAUSE button pauses Disc playback - press PLAY to resume.

INPUT button activates the DVD Player’s SETUP Menu.

INPUT

When in TV mode the INPUT button performs the INPUT source switch function.

When in a mode that has been programmed for VCR the INPUT button performs the TV/VCR antenna switch function.

When in a mode that has been programmed for Cable the INPUT button performs the A.B switch function.

When in a mode that has been programmed for SAT the INPUT button performs the TV/SAT switch function. When in a mode that has been programmed for DVD the INPUT button performs the DVD Setup function.

OK means same as SELECT - some manufacturers use OK label and others use SELECT label on their remotes.

CCwill activate the Closed Caption feature if your device has that feature.

6

SRU4050A-OM(4D)_H14042A.pmd6-7

Button Functions, cont.

SHIFT Button

The SHIFT button is a “toggle” button. I.E. press and release it to get into shifted operation, press and release again to get back out. The Red Indicator is on when you are in “shifted” mode.

The shifted functions are those labeled in Green i.e. MENU, EXIT, OK, GUIDE, and the navigation keys. When not in Shift these buttons operate respectively as INFO, LAST, MUTE (M), CC, CHAPTER/CHAN UP/ DOWN and VOLUME UP/DOWN. The non-shifted functions are those labeled in Black or Blue.

To access the shifted “green” functions, press and release SHIFT. The Red Indicator will stay on while in Shift mode and blinks off briefly for any subsequent button press. Press and release desired button labeled in green for that function. To exit Shifted operation, press and release the SHIFT button. Note the remote will automatically time-out from Shifted mode if no button is pressed for approximately 15 seconds.

To access the following functions in SAT or DVD Modes, press SHIFT first.

MENU button brings up the Menu screen - use with the UP, DOWN, LEFT and RIGHT navigation buttons. OK button is used for on-screen Menu selection. EXIT button is used to Exit or Clear on-screen Menu displays.

Example:

To access Menu and use the navigation functions.

1.Press and release SHIFT (red indicator turns on).

2.Press and release the MENU (INFO) button.

3.Press and release the UP, DOWN, LEFT and RIGHT buttons as desired.

4.Press and release the EXIT (LAST) button to clear the on-screen Menu display.

5.Press and release SHIFT for normal remote operation (red indicator turns off).

7

10/9/2006, 2:49 PM