Philips SRU4205 owner manual Setting Favorites, Buttons Icons

Page 6

Setting Favorites

Setting Favorites (cont.)

The Favorites feature is what really sets this remote apart from other remotes. It lets you go to your favorite channel(s) by simply pressing a button next to a sticker (or label) that represents that favorite channel.

1.Flip the switch on the back of the remote to either position (in this case, we’ll call this position User 1).

2.Press and hold SETUP until the indicator remains on, then release SETUP.

3.Repeatedly press SELECT to select the desired mode (TV, VCR, etc.), unless the desired device is already selected. This sets the device that this favorite button controls.

4.Press one of the 10 FAVORITE buttons to set up a favorite channel. Let’s say we select the top right- hand FAVORITE button.

5.Enter the channel number for this favorite channel.

Note: You can use up to 5 buttons, including 0 through

9, OK, and - to enter your favorite channel: 550, 472Enter, 162OK, 5-7, etc., are examples.

6.Press SETUP when you’ve finished entering the channel.

After setting up your favorite, do the following.

7.Attach the sticker that represents the favorite channel you set up above to the location next to that FAVORITE button. (In the example on p. 11, we’ve used an ABC sticker.)

Follow Steps 1 through 7 to set up more favorites, each time selecting a different FAVORITE button in Step 4, and entering a different channel number in

Step 5. Then place the appropriate sticker next to the FAVORITE button, as in Step 7.

After you’ve set up all 10 favorites (or fewer if you don’t want to set all of them up), you can set the switch on the back of the remote to the other position (e.g., or for instance, User 2) and then repeat Steps 1 through 7 to set up another group of favorites for another user.

To go to your favorite channel, simply press the FAVORITE button next to the sticker that represents the icon for that channel.

10

To switch from User 1 to User 2 or vice versa, move the switch on the back of the remote. Doing so “flips” the stickers for the appropriate set of 10 FAVORITES, for either User 1 or User 2, into view.

Flip switch in

FAVORITE

 

 

 

 

 

FAVORITE

either direction

buttons

 

 

 

 

 

 

icons

for User 1 or

 

 

 

 

 

 

 

 

 

 

User 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: If you can’t find a sticker for one of your favorites, go to www.wikipedia.org to find labels for your favorites. Do a search by using the key words television logos. Find the logo you need. Right-click the logo and save this logo somewhere on your computer. Print the logo. If the logo needs adjustment, you can use Microsoft Paint, etc. Cut out the logo and paste it next to your FAVORITE button.

Adjusting the Delay Between Digits

You might need to adjust the time between digits sent for a favorite channel. If the delay is too long you might point the remote away from your device before all the digits have been sent. If the delay is too short your device might not respond.

1.Press and hold SETUP until the indicator remains on, then release SETUP.

2.Press and release PLAY. The indicator blinks, then stays on.

3.Press and release a number from 0 to 9. 0 is no delay and 9 is the longest delay.

11

Image 6
Contents SRU4205/27 Table of Contents IntroductionButton Functions REC, STOP, PAUSE, Play VCR controlsSCAN+ Fast Forward Fast-forwards Setup Code Identification Feature Direct Code Entry Code Search by BrandCode Search Setting Favorites Buttons IconsProgramming Combo Device Codes Code Learning Tips On LearningLearning Commands IR Transmitter FinderMaster Clear To Clear All Learned Commands UnderAll Modes Clearing CommandsTo ClearAll Learned Commands Undera Mode Master ClearIndicator blinks after you program a product code TroubleshootingRemote does not operate some features of your product Limited Lifetime WarrantyTabla de contenidos IntroducciónFunciones de botones Preparación Búsqueda de marcas Búsqueda de códigosConfiguración de favoritos Ajuste del retardo entre dígitosPreparación continuación Programación de códigos de dispositivos combinadosFunción de traspaso de control de vídeo/DVD/DVR Aprendizaje de códigos Consejos para el aprendizaje de códigosBuscador de transmisor de IR Aprendizaje de comandosEliminación de comandos InputEl mando no acciona el producto Solución de problemasGarantía limitada de un año El mando no acciona algunas funciones del productoTable des matières Fonctions des touches Fonctions des touches suite Préparation Entrée de code directe Recherche de code par marque Recherche de codeFonction d’identification de code Réglage des favoris Réglage des favoris suiteRéglage du délai entre les chiffres Réglage suite Commande prioritaire de volume/sourdineRéglage Programmation des codes d’appareils combinésApprentissage des codes Conseils sur l’apprentissageApprentissage des codes suite Détecteur d’émetteur IR Apprentissage des commandes Suppression de commandes Suppression de toutes les commandes ap- prises sous un modeRéinitialisation complète Garantie limitée de un an La télécommande ne commande pas votre appareilDépannage Le voyant clignote après avoir programmé un code