Philips BDP7500 user manual Get started

Connect power

Caution

•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.

•Before connecting the AC power cord, ensure you have completed all other connections.

Note

•The type plate is located on the back of the product.

•You may experience tingling feel upon touching the metal case of this product. This tingling feel is common for products with aluminum finishing. It does not cause any harm as consumer safety is not compromised.

1 Connect the AC power cable to:

•this product.

•the wall socket.

»This product is ready to be set up for use.

4 Get started

Caution

•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

Prepare the remote control

Caution

•Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

2Insert 2 AAA batteries with correct polarity (+/-) as indicated.

3 Close the battery compartment. English

Note

•If you are not going to use the remote control for a long time, remove the batteries.

•Do not use old and new or different types of batteries in combination.

•Batteries contain chemical substances, so they should be disposed of properly.

Find the correct viewing channel

1 Press to turn on this product.

2Turn on the TV and switch to the correct video-in channel. (Refer to the TV user manual on how to select the correct channel.)

Use the Home menu

Play Disc USB Settings

1 Press .

•To start disc play, select [Play Disc].

•To view the USB contents, select [USB].

•To access the setup menus, select [Settings].

Navigate the menu

1When a menu is displayed, press the buttons on the remote control to navigate.

Button	Action
	Move up or down.
	Move left or right.
OK	Confirm a selection.
	Enter numbers.

1Open the battery compartment.

EN 11