•HDMI category 2 cable
•Quick start guide
•User manual
Video
•Signal system: PAL / NTSC
•Composite video output: 1
•Component video output: 480/576i, 480/576p, 720p, 1080i
•Y: 1
•Pb: 0.7
•Pr: 0.7
•HDMI output 480p, 576p, 720p, 1080i, 1080p, 1080p24
Audio
•2 Channel analog output
•Audio Front L + R : 2 Vrms (> 1 kohm)
•7.1 Channel analog output
•Audio Front L + R : 2 Vrms (> 1 kohm)
•Audio Surrond L + R : 2 Vrms (> 1 kohm)
•Audio Center : 2 Vrms (> 1 kohm)
•Audio Subwoofer : 1.15 Vrms (> 1 kohm)
•Audio Rear L + R: 2 Vrms (> 1 kohm)
•Digital output: 0.5
•Optical, Coaxial
•HDMI output
•Sampling frequency:
•MP3: 32 kHz, 44.1 kHz, 48 kHz
•WMA: 44.1 kHz, 48 kHz
•Constant bit rate:
•MP3: 112 kbps - 320 kpbs
•WMA: 48 kpbs - 192 kpbs
USB
•Compatibility:
•Class support: UMS (USB Mass Storage Class)
Main unit
•Power supply rating
•Europe: 220~240V ~AC, ~50 Hz
•Russia: 220~230V ~AC, ~50 Hz
•Asia Pacific: 110~240V ~AC, 50~60 Hz
•Latin America: 110~240V ~AC, 50~60 Hz
•China: 110~240V ~AC, ~50 Hz
•Power consumption: 22 W
•Power consumption in standby mode: 0.25 W
•Dimensions (w x h x d): 435 x 55.7 x 245 (mm)
•Net Weight: 2.4 kg
Laser Specification
•Laser Type:
•BD Laser Diode: InGaN/AIGaN
•DVD Laser Diode: InGaAIP
•CD Laser Diode: A IGaAs
•Wave length:
•BD: 405
•DVD: 650
•CD: 790
•Output power:
•BD: Max. ratings: 20mW
•DVD: Max. ratings: 7mW
•CD: Max. ratings: 7mW
8 Troubleshooting
Warning
•Risk of electric shock. Never remove the casing of the product.
To keep the warranty valid, never try to repair the product yourself.
If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome.
If you contact Philips, you will be asked for the model and serial number of your product.The model number and serial number are on the back of your product.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
No reaction to the remote control.
•Connect this product to the power outlet.
•Point the remote control at the IR sensor located on the front panel of this product.
•Insert the batteries correctly.
•Insert new batteries in the remote control.
Picture
No picture.
•See TV manual for correct video input channel selection. Change the TV channel until you see the Philips screen.
No picture on HDMI connection.
•If this product is connected to an unauthorized display device with an HDMI cable, the audio/ video signal may not be output.
•Check if the HDMI cable is faulty. Replace a new HDMI cable.
•If this happens when you change the [HDMI Video] setting, press HDMI on the remote control repeatedly until picture appears.
English
EN 23