.
How to change a programmed recording (TIMER)
1.Switch on the TV. If required, select the pro- gramme number for the video recorder.
2.Press MENU . The main menu will appear.
3.Select 'TIMER' with K B 
L C . Then press
B 1 .
4.Select ONCE, DAILY, or WEEKLY recording with K B 
L C . Then press B 1 .
5.Select a TIMER block with 
. (The flashing number indicates an empty TIMER block.)
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
6.Press | CLEAR |
| to delete information and input | ||||||||||
correct information with |
|
|
|
|
|
| or |
| . | ||||
K B |
| L C | 0..9 | ||||||||||
7.To end, press |
|
|
| . |
|
|
|
|
|
| |||
| STATUS/EXIT | ||||||||||||
8.Switch off with |
|
|
|
|
|
|
| . |
|
|
| ||
| STANDBY/ON y |
|
|
|
| ||||||||
Problems and solutions for pro- grammed recordings
Error message: ' 
' will flash in the video recorder display
•No cassette was inserted. Insert a cassette and
switch off the video recorder using 
•A cassette was inserted with the security tab removed.
Undo the erase protection (chapter 'Manual Recording', section 'Preventing accidental erasing of cassettes') or insert a different cassette.
Cassette is ejected during recording
•The end of the tape was reached during recording.
The video recorder does not react
•While a programmed recording is being made, you cannot operate your video recorder manually. If you want to cancel the programmed recording, press
C/A .
•The end of the tape was reached during recording.
12 | EN |
|