Note
•If the recorder cannot find any channels, you will be asked to adjust the antenna. The reception strength and quality of the antenna signal are displayed. Check the antenna cable connections.
•When the signal level is satisfactory, press the key to resume the installation.
•If the level and quality of reception remain insufficient, contact your antenna installer.
•If you use an indoor antenna with an amplifier, it is possible to power the antenna from the recorder (+5VDC, 50mA).
•In the Power Settings menu, set Aerial Power Amplification to Yes (see Setting the power parameters, page 29).
Selecting your region
11 Select your region.
12 Select [Save] and press the key to confirm.
You recorder is now set. You can start watching and enjoying all your FREEVIEW channels.
Should any problem that prevents you from completing the installation arise, please contact your retailer or the Philips Hotline.
UK Hotline: 08450 900 315
15