Using the TV/DTV Button, Using the Channel List

USING THE CHANNEL LIST

The channel list is an alternative way of viewing what channels are available on your digital receiver. The list will be displayed over the programme you are currently watching and will also indicate which channels have been selected as your favourites or have been locked (see 8.5 to 9.3 on how to select favourite and locked channel).

1.To display the channel list, press the SELECT button whilst viewing any channel. The following is an example of the information that will appear on-screen. All available channels will be included in the channel list. Make the channel list in the photograph consistent with the menu tree on page 10.

2.The display will show a total of 6 channels at a time, along with symbols that identify the status of particular channels, such as favourite and/or locked channel. The channel you are currently viewing will be highlighted on this list.

3.To move through the channel list, press the UP or DOWN arrow button as indicated on- screen. The selected channel will be highlighted. When you reach the bottom of one screen, continue to press the DOWN arrow to scroll to the next screen. Alternatively press RIGHT or LEFT to move a whole page at a time.

4.At any stage, you can press the EXIT button to remove the channel list from the screen, or alternatively, with the required channel highlighted, you can change to that channel by pressing the SELECT button.

8.3 USING THE TV/DTV BUTTON

This button is used to switch between watching digital channels via your digital receiver and standard analogue channels on your TV. The function of the button depends on whether you have connected your digital receiver using the scart lead supplied.

As an example, if you have used the scart lead between your digital receiver and TV, and are currently recording a digital programme, you may need to use the TV/DTV button to watch a standard analogue channel. Pressing this button again will switch back to watching a digital channel.

In most cases, having connected your digital receiver and TV by a scart lead, you will not have to manually select the correct channel on your TV for watching digital programmes. To ensure the correct channel is selected automatically, your TV should be switched on before your digital receiver. If your TV is switched on after your digital receiver, you may need to use the TV/DTV button to select the correct channel on your TV.