INFO DISPLAY TIME
With this option you can set the length of time that
IMPORTANT:
If this option is set to Off, certain menus will no longer appear
TIMER ALARM
This option enables you to select either visual or audio&visual for the timer alarm. The alarm is factory set to audio&visual, and as such will give a warning when a programme is about to start for which the timer has been set. Your digital receiver will display the code rEd on the LED and will beep. More information on how the timer works is included in section 9.5.
TIME and DATE
Your digital receiver will automatically set the current time and date by taking information from broadcasters. However, should you wish to adjust these settings, you can do so manually using this menu.
Use the number buttons to enter the correct details, remembering that the time should be entered in a 24 hour clock format.
9.9ALTERING SETTINGS FOR YOUR TV and
VIDEO
The settings that appear on this menu when you install your receiver have been made by the factory, and in most case need not be changed. Press the MENU button, then button 4 (viewing preferences) and button 2 (TV and video settings) to display the menu below.
Each option is briefly described below. Pressing the EXIT button at any stage of this menu will return you to a normal TV picture.
In all instances, the UP and DOWN arrow buttons should be used to select the required option and the LEFT and RIGHT buttons to amend the setting.
TV SCREEN
This option enables you to tell the receiver whether you have a 4:3 or 16:9 (widescreen) TV. If you select 16:9 in this option, the receiver will automatically display any widescreen programmes in the correct format.
If you choose 4:3, a further option will be highlighted below that enables you to select how you would like a widescreen programme to be shown on your standard 4:3 TV.
26