Philips DCR 9001/02 Scan, Display, Dolby Digital out of the digital audio output, Wake up

12.4 Scan

This screen is used to view the date and results of the last scan performed. It may also be used to launch a new scan.

-Press the green colour key to scan the KDG network.

-Alternatively, press the yellow colour key to search for All channels.

12.5 Display

This screen is used to set your receiver according to your TV set screen format and depending on the output selected (HDMI/DVI,YPbPr, or EXT1/2).

- Set values for the following (default settings are underlined):

		HDTV output		SDTV output
	HDMI/DVI		YPbPr	EXT1/2
TV Screen Format	16: 9			4: 3 or 16: 9, depending
				on your TV set
Display format	Full Screen or Pillar Box, or Extended			Auto or Letter Box, or
	See table in paragraph 13.5.1.			Centre Cut-Out
Resolution	Auto, 1080i, 720p, or 576p			Not adjustable
				(always 576i)
TV SCART Output				RGB (recommended) or
				CVBS, or S-VIDEO
	Not applicable
AV Control				On (recommended) or
				Off

- Press EXIT to exit the screen.

12.6 Dolby Digital out of the digital audio output

This screen is used to enable/disable Dolby Digital sound.

When Dolby Digital is disabled, you can still get stereo sound in digital format (PCM).

12.7 Wake up

This screen is used to set the channel to be tuned at the receiver wake-up. Default setting is programme 100.

EN

77