Philips 26PFL4907, 22PFL4907 Color enhancement Off, Red, Alignment, Enhancement, Film mode

*You can set a particular about picture quality in Advanced picture.

31

to select the desired setting, then press OK

(Red, Yellow, Green, Cyan, Blue and Magenta)

English

Auto picture

Backlight

Contrast

Brightness

Color

Tint

Sharpness

Advanced picture

Color alignment	Mode
Noise reduction	Minimum
Black stretch	On
Dynamic contrast	Off
Gamma
MPEG artifact reduction	Off
Color enhancement	Off
Custom color managem	Red

		Cursor ◄	Cursor ►
		to rotate only	to rotate
			only selected
	Tint	selected color
			color tint in
Custom		tint in clockwise
			counterclockwise
color		direction	direction
management
	Saturation	to decrease color	to increase color
		with only selected	with only selected
		color	color
		to decrease	to increase
	Brightness	brightness with	brightness with
		only selected	only selected
		color	color

		to set the color temperature to
	Mode	Personal, Cool, Normal and Warm
		When you adjust the following
		settings, Personal will be set
		automatically.
		Cursor ◄	Cursor ►
	Red gain	to decrease	to increase
		contrast with red	contrast with red
	Green gain	to decrease	to increase
		contrast with	contrast with
Color		green	green
alignment	Blue gain	to decrease	to increase
		contrast with blue	contrast with blue
	Red offset	to decrease	to increase
		brightness with	brightness with
		red	red
	Green offset	to decrease	to increase
		brightness with	brightness with
		green	green
	Blue offset	to decrease	to increase
		brightness with	brightness with
		blue	blue
Noise	to select the desired setting, then press OK
reduction	(Off, Minimum, Medium, Maximum and Auto)
Black	to select the desired setting, then press OK
stretch	(Off, Minimum, Medium and Maximum)
Dynamic	to select the desired setting, then press OK
contrast	(Off, Minimum, Medium and Maximum)
Gamma	Cursor ◄		Cursor ►
	to adjust the gamma encoding of images
MPEG	to select the desired setting, then press OK
artifact
	(Off, Minimum, Medium and Maximum)
reduction
Color	Off	to set color enhancement to Off
enhancement	On	to make colors more vivid and bright

Film mode	Off	to set film mode to Off
	Auto	to optimize the picture recorded by
		the original film

Note

••Mode selection is available only if

––the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.

––the connected HDMI device is outputting a video signal.