Philips 32PFL4907, 22PFL4907 Wake up your computer, No picture or sound Check if the Power is On

Page 50

50

Symptom

Remedy

Power is ON but no screen

•• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.

image.

•• Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray / DVD recorder.

 

 

•• Make sure that the selected Input mode is connected to the working Input jack.

 

•• Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode.Tap any key on the keyboard to

 

wake up your computer.

No picture or sound

•• Check if the Power is On.

 

•• Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray / DVD recorder.

 

•• View other TV channels.The problem might be limited to the broadcasting station or weak signal strength.

 

•• Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and Turn On the unit again.

 

•• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.

 

•• Make sure that the selected Input mode is connected to the working Input jack.

 

•• Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode.Tap any key on the keyboard to

 

wake up your computer.

 

•• Make sure that the sound is not muted. Press MUTE so that the volume bar and current volume level will appear on the TV screen.

 

•• Make sure that the volume is NOT set to 0 or . If so, use VOL + / − to adjust to the desired volume.

 

•• Make sure that the headphone is NOT connected to the Headphone Audio Output jack.

 

•• Make sure that the TV speakers is NOT set to Off.

 

 

No color

•• View other TV channels.The problem might be limited to the broadcasting station or weak signal strength.

 

•• Adjust Color in Picture settings. p. 30

No sound, distorted sound or

•• Make sure that the Analog Audio signals from the HDMI-DVI device are connected to the Analog Audio (L/R) Input jacks.

incorrect Audio Sound is heard

•• When using Component Analog Video, Composite Analog Video or PC VGA Video make sure that the Analog Audio (L/R)

when using the HDMI-DVI

connectors are mounted into the Audio (L/R) Input jacks.

connections.

 

 

 

Adjusted Picture or Sound

•• You must set Home in Location. p. 38

settings are not effective every

Otherwise, the settings you adjusted will not be memorized after the unit goes into Standby mode.

time the unit is Turned On.

 

Sound OK, picture poor

•• Electrical interference from nearby appliances may affect picture quality when viewing an off-the-air low power NTSC analog

 

broadcast signal.

 

•• Adjust Contrast and Brightness in Picture settings. p. 30

 

•• View other TV channels.The problem might be limited to the broadcasting station or weak signal strength.

 

•• For the best picture quality, watch High Definition wide screen programs.

 

If the HD content is not available, watch Standard Definition programs instead.

Picture OK, sound poor

•• View other TV channels.The problem might be limited to the broadcasting station or weak signal strength.

 

•• Check if the Audio cable is connected into the unit correctly.

 

 

You see a distorted picture or

•• You may be getting interference from electrical appliances, automobiles, motorcycles or fluorescent lights when viewing an off-the-

hear an unusual sound.

air low power NTSC analog broadcast signal.

 

•• Try moving the unit to another location to see if this is the cause of the problem.

 

 

Ghosts, lines or streaks in picture

•• Electrical interference from nearby appliances may affect picture quality when viewing an off-the-air low power NTSC analog

 

broadcast signal.

 

•• View other TV channels.The problem might be limited to the broadcasting station or weak signal strength.

 

 

You see noise or trash on the

•• When the capabilities of the unit exceed the capabilities of the Digital broadcasting, the signal will be increased to match the

screen.

capabilities of the display of the unit.This may cause noise or trash.

 

When viewing an off-the-air low power NTSC Analog broadcast signal may show noise or trash on the screen.

Different color marks on the TV

•• View other TV channels.The problem might be limited to the broadcasting station, missing data or pixelation.

screen

 

You switch to a different Input

•• This unit will memorize the volume level from the last time you adjusted it.

and the volume changes.

•• If the volume of the sound from another device is higher or lower, then the loudness will change.

 

 

•• Make sure AVL is set to On. p. 32

You switch to a different Input

•• This unit will memorize the viewing mode from the last time you used the particular Input modes.

and the screen size changes.

 

The display image does not

•• If you are using the unit as a PC monitor, make sure that Horizontal shift and Vertical shift in Picture are set correctly. p. 30

cover the entire screen.

•• If you are watching TV or using the Composite Video, Component Video or HDMI with 480i Input, press FORMAT repeatedly to

 

switch various screen modes.

Captions are displayed as a white

•• Interference from buildings or weather conditions may cause captioning to be incomplete if watching Analog TV (NTSC) signals.

box. No caption is displayed in

•• Broadcasting station may shorten the program to insert advertisements.

the Closed Caption-supported

•• The Closed Caption decoder cannot read the information of the shortened program.

program.

 

Black box is displayed on the TV

•• The text mode is Selected. For caption, select CC-1, CC-2, CC-3 or CC-4.

screen.

 

Cannot connect to the network.

•• Check if the Ethernet cable connection is properly made.Turn On the modem or broadband router.

 

•• Check the network settings.

 

•• Check if the broadband router and/or modem is correctly connected.

 

 

Sometimes video quality is poor

•• The wireless network connection quality varies depending on the distance or obstacles (e.g. wall, basement, 2nd floor) between the TV

when using the wireless LAN.

Wireless LAN Adapter and the wireless router (access point), from other wireless networks, and brand and type of the wireless router

 

(access point).When using the Wireless LAN of the TV, it is suggested to place the wireless router as close as possible to the Television.

English

Continued on next page.

Image 50
Contents Register your product and get support at Contents Product Safety Notification 32PFL4907 Wall Mount Bracket Kit22PFL4907 Left and right sideFederal Communications Commission Notice Pixel characteristicsWarranty ModificationsVudutm is a trademark of VUDU, Inc CopyrightConsumer Notice Twitter is a trademark of Twitter, IncEnvironmental care Positioning the TVRegulatory notices End of life directivesGet started FeaturesSupplied accessories DTV /TV / CATVAttaching the base Installing the remote control batteriesSlide the battery cover off the back of the remote control Managing cablesPREV.CH Remote control functionPOWER-ON / STANDBY-ON Control panel TerminalsConnecting the antenna or the cable Plugging in the AC power cordStop Initial setupWireless SkipAfter an initial setup is completed Press OK to finish Settings assistantSwitching channels Switching on your TV and putting it in Standby modeAdjusting volume Use your TVWatching channels from an external device Access the Home menuEnable or disable RC key forwarding from the Home menu Lock or unlock your device from the Home menuPhilips Wireless MediaConnect View photos, play music and watch videos using DlnaWatch videos using Dlna View your pictures using DlnaListen to music using Dlna Guide to DlnaNet TV Add to Favorites Enjoying vTunerVideo playback Remove from FavoritesRemove from favorite list Internet radio playbackAdd to favorite list Add stations on the vTuner websitePandora operations Guide to Twitter Home screen Using TwitterLogging in to Twitter Viewing tweets on the TVViewing Lists on Twitter Viewing Favorites on TwitterDisplaying Mentions on Twitter Viewing Trends on TwitterCreate and use lists of favorite channels Using auto modeSleep timer For 43 video signal For PC Input signalFor 169 video signal Changing picture formatPicture Jpeg Music MP3 Video MpegUse more of your TV Auto picture Personal Picture Settings assistant Start nowYou must set Home in Location. p Brightness Color Tint SharpnessRed Film modeColor enhancement Off AlignmentAVL Caption settings Closed captions Channel lock Start now SleeptimerChild and ratings lock Channel lock TV ratings lock Movie ratings lockChild lock Movie ratings lock Setting TV and movie ratingsChannel lock TV-MACanada English or Canada French ratings Change PINLanguage Installation mode Channel installationWeak channel installation Uninstall channelsUse Philips EasyLink Setting your location to homePreferences StickerHdmi EasyLinkDevice list HDMI-ARCNetwork Network settings assistantManual network settings WPSAuto Router Enter Key AutoManually enter your Ssid NoneIP configuration Connection testChecking your current software version Return your settings to default valuesPreparing for the software upgrade Netflix deactivation Upgrading the softwareAutomatically check for latest software Netflix ESNSelecting your connection quality Connecting devicesConnecting your devices Component Analog Video Connection Connecting the TV to the Internet using an Ethernet cableHDMI-ARC connection Composite Analog Video ConnectionPC connection Connecting the TV to the Internet using a wireless LANDigital Audio Output Connection Following video signals can be displayed USB Memory StickTroubleshooting Useful tipsConnectors are mounted into the Audio L/R Input jacks No picture or sound Check if the Power is OnWhen using the HDMI-DVI Adjusted Picture or Sound You must set Home in Location. pCheck the firewall setting of the modem or router Wireless connection is poorCannot use the wireless Check if your PC runs Philips Wireless MediaConnectGlossary MaintenanceInformation Specifications Warranty Contact the Customer Care Center at 1 866 309License GPLNo Warranty How to Apply These Terms to Your New Programs IiiPage Page How to Apply These Terms to Your New Libraries USALibxml2 ExpatAres LuaFree Type LibJPEG Zlib/libpng LicenseXmlrpc OpenSSLIncluding the GNU Public Licence Original SSLeay LicenseUnicode License means this document OpenGLUNICODE, INC. License Agreement Data Files and Software Page Xii Exhibit aPhilips and Philips Shield are used under license Koninklijke Philips Electronics N.V
Related manuals
Manual 67 pages 9.61 Kb