13
AUTOMATICALLY PROGRAM
Your TV can automatically set itself for local area (or Cable TV) channels. This makes it easy for you to select only the TV sta-
tions in your area when the CHANNEL (+),
Note: Make sure the antenna or cable signal connection has been completed before AUTO PRO- GRAM is activated.
1 Press the MENU button on the remote to show the on- screen menu.
2 Press the CURSOR UP 3 or DOWN 4 buttons to scroll through the
3 Press the CURSOR RIGHT
2 `button to display the Install menu features.
4 Press CURSOR UP 3 or DOWN 4 buttons to scroll the Install features until the words Auto Program are highlighted.
5 Press the CURSOR RIGHT
Main
Picture | Brightness |
Sound | Color |
Features | Picture |
Install | Sharpness |
| Tint |
| More... |
|
|
2
4
1 |
| 6 |
2 | VOL | 3 |
4 |
| 5 |
Main
Picture | Language |
Sound | Tuner Mode |
Features | Auto Program |
Install | Channel Edit |
Install |
|
Language |
|
Tuner Mode |
|
Auto Program |
|
Channel Edit |
|
Auto Program |
|
Channel | 12 |
Auto Program |
|
Channel | 13 |
Auto Program |
|
Channel | 14 |
2 button to start the Auto Program scanning of chan- nels. Auto Programming will store all available channels in the TV’s memory then tune to the lowest available channel when done.
6 When finished, press the STATUS /EXIT button to remove the menu from the TV’s screen.
HELPFUL HINTS
When CABLE is selected, channels 1- 125 are available.
When ANTENNA is selected, chan- nels
When AUTO is selected, the TV will automatically set itself to the correct mode based on the type of signal it detects when the AUTO PROGRAM feature is activated.