Philips 27PT5441, 32PT5441, 27PT6441, 27PT6442 guide

to display the Timer menu.

Press the CURSOR RIGHT

Press the MENU button on the remote to show the on- screen menu.

20 SETTING TV TO STARTUP ON A SPECIFIC CHANNEL

You can select a specific channel that the television will tune to

when the timer turns the set On. Follow these steps to select the channel.

2 Press the CURSOR UP 3 or DOWN 4 buttons to scroll through the on-screen menu until the word Features is highlighted.

3 2 button to display the Features menu.

4With Timer selected, press the CURSOR RIGHT 2 button

5 Press the CURSOR UP 3 or DOWN 4 buttons to scroll through the Timer menu until Channel is highlighted.

6 Press the Numbered buttons to enter the desired start-up channel. Or, press the CUR- SOR RIGHT 2 or CURSOR LEFT 1 or the CH+ or CH- buttons repeatedly to enter the start-up channel you want.

NOTE: The Activate Control must be set to Once or Daily for this Channel control to take effect.

	Main
	Picture	Brightness
	Sound	Color
	Features	Picture
	Install	Sharpness
		Tint
		More...
		2
1		5	7
6			3
2	VOL		4

5 6

6 6

Main

Picture	Timer
Sound	AutoLock
Features	Active Control
Install	Digi. Pic. Demo
Timer
Time	10:-- AM
Start Time
Stop Time
Channel
Activate
Display
Timer
Time
Start Time
Stop Time
Channel	2
Activate
Display

7 When finished, press the STATUS /EXIT button to remove the on-screen menu from the TV’s screen.

NOTE: Active Control will only appear in the menu of models 27PT6441/37 and 27PT6442/37.

HELPFUL HINTS

Remember, be sure to press “0” and then the hour number for single digit entries.

You can get to the Clock setting by pressing the Clock button on the remote control.

The TV’s clock settings may be lost when the TV is unplugged or when AC power to the set is interrupted.