Philips 27PT5441, 32PT5441, 27PT6441, 27PT6442 user manual AV AUDIO/VIDEO Input Connection

4

AV (AUDIO/VIDEO) INPUT CONNECTION

The TV’s audio/video input jacks are for direct picture and sound connections between the TV and a

VCR (or similar device) that has audio/video output jacks. Both the AV1 and AV2 Input Jack connections are shown on this page, but either one can be connected alone. Follow the easy steps below to connect your accessory device to the AV1 and AV2 IN Jacks located on the back of the TV.

1Connect the VIDEO (yellow) cable to the VIDEO AV1 IN (or AV2 IN) jack on the back of the TV.

2Connect the AUDIO (red and white) cables to the AUDIO (left and right) AV1 IN (or AV2 in) jacks on the rear of the TV.

3Connect the VIDEO (yellow) cable to the VIDEO OUT jack on the back of the VCR (either one or two) or accessory device being used.

4Connect the AUDIO (red and white) cables to the AUDIO (left and right) OUT jacks on the rear of the VCR (either one or two) or accessory device being used.

5Turn the VCR (either one or two) or accessory device and the TV ON.

6Press the AV button to set the TV to its AV1or AV2 channel.

7With either of the VCRs (or accessory devices) ON and a pre- recorded tape (CD, DVD, etc.) inserted, press the PLAY button to view the tape on the television.

Back of TV

		1				3
	Monitor out			in	AV2 in
	VIDEO
	L/Mono
	AUDIO
						S-VIDEO
	R
				VIDEO
AV1	2				2	4
Connection
ANT/CABLE	S-VIDEO	R	L	VIDEO	1
OUT	OUT	AUDIO OUT		OUT
			Back of VCR
VCR One (or		7
5 accessory device) (Equipped
with Audio and Video Output
Jacks)						Video In
						(Yellow)
AV2 Connection
						Audio In
						(Red and
						White)
ANT/CABLE	S-	R	L	VIDEO
OUT		AUDIO OUT		OUT

4 3

7

5 VCR Two (or accessory device) (Equipped with

Video and Audio Output Jacks)

HELPFUL HINT

Audio and video cables are not sup- plied with the TV, but are available from Philips or electronics retailers.