Sony TS-WM7 manual Precautions, En Warning, Explanation of Graphical Symbols, Installation

Page 2

PRECAUTIONS

Read these Operating Instructions carefully and completely before operating the unit. All precautions on this booklet and on the unit should be strictly followed.

Keep the Operating Instructions for future reference.

En WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

“CAUTION:TO REDUCE THE RISK OF

ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.”

Explanation of Graphical Symbols:

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Installation

1 Water and moisture — Do not use this unit near water, such as near a bathtub, washbowl, swimming pool, or the like.

2 Heat — Do not use this unit near sources of heat, including heating vents, stoves, or other appliances that generate heat. It also should not be placed in temperatures less than 5°C (41°F) or greater than 35°C (95°F).

3 Mounting surface — Place the unit on a flat, even surface. 4 Ventilation — The unit should be situated with adequate space around it so that proper heat ventilation is assured. Allow 10 cm (4 in.) clearance from the rear and the top of the

unit, and 5 cm (2 in.) from each side.

-Do not place the unit on a bed, rug, or similar surface that may block the ventilation openings.

-Do not install the unit in a bookcase, cabinet, or airtight rack

where ventilation may be impeded.

5Objects and liquid entry — Take care that objects or liquids do not get inside the unit through the ventilation openings.

6Carts and stands — When placed or

mounted on a stand or cart, the unit should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit or cart to overturn or fall.

7 Wall or ceiling mounting — The unit should not be mounted on a wall or ceiling, unless specified in the Operating Instructions.

Electric Power

1 Power sources — Connect this unit only to power sources specified in the Operating Instructions, and as marked on the unit.

2Polarization — As a safety feature, some units are equipped with polarized AC power plugs which can only be inserted one way into a power outlet. If it is difficult or impossible to insert the AC power plug into an outlet, turn the plug over and try again. If it still does not easily insert into the outlet, please call a qualified service technician to service or replace the outlet. To avoid defeating the safety feature of the polarized plug, do not force it into a power outlet.

3AC power cord

-When disconnecting the AC power cord, pull it out by the AC power plug. Do not pull the cord itself.

-Never handle the AC power plug with wet hands, as this could result in fire or shock.

-Power cords should be firmly secured to avoid being severely bent, pinched, or walked upon. Pay particular attention to the cord from the unit to the power outlet.

-Avoid overloading AC outlets and extension cords beyond

their capacity, as this could result in fire or shock.

4 Extension cord — To help prevent electric shock, do not use a polarized AC power plug with an extension cord, receptacle, or other outlet unless the polarized plug can be completely inserted to prevent exposure of the blades of the plug.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Active Speaker System Installation PrecautionsExplanation of Graphical Symbols Electric PowerTable of Contents Positioning PreparationsConnection Moderate volume setting Power and VolumeAuto Power Adjustment examplesPhase Specifications For assistance and information United States and Puerto Rico Explicación de los símbolos gráficos PrecaucionesAdvertencia InstalaciónDaños que necesitan ser reparados IndiceMantenimiento Cable conector con clavijas fono RCAColocación PreparativosConexión Operaciones Alimentación y volumenAjuste del volumen a un nivel moderado Ejemplos de ajusteFase Especificaciones PesoAlimentation Explication des symboles graphiquesAvertissement Dommages exigeant une réparation Table DES MatieresEntretien Connexions PositionnementUtilisation Mise sous tension et VolumeRéglage sur un niveau de volume modéré Mise sous tension automatiquePhase Borne d’entrée Prise Input Sensibilité/impédance d’entrée

TS-WM7 specifications

The Sony TS-WM7 is an innovative and highly regarded in-car audio speaker designed to elevate the listening experience for music enthusiasts. With its remarkable blend of design, technology, and performance, the TS-WM7 represents a commitment to delivering superior sound quality while seamlessly integrating into your vehicle's audio system.

One of the standout features of the TS-WM7 is its unique multi-layer cone structure. This construction uses a combination of materials that enhances rigidity while minimizing distortion. The result is a speaker that produces clear and detailed sound across a wide range of frequencies. The multi-layered design contributes to improved bass response, providing a deep, resonant sound that can fill any car interior.

The TS-WM7 incorporates advanced magnet technology, including a high-energy ferrite magnet. This technology ensures that the speaker operates efficiently, delivering powerful output while maintaining sound clarity. The high sensitivity of the speaker means that it can perform well even with lower power inputs, making it compatible with a variety of head units and amplifiers.

Furthermore, the TS-WM7 features a sophisticated voice coil system that offers optimal thermal management. This helps prevent overheating during prolonged use, ensuring reliability and longevity, even during those high-volume jams. The design also promotes better airflow around the coil, contributing to improved sound quality and efficiency.

Installation of the TS-WM7 is designed to be user-friendly, with a compact design enabling it to fit in various vehicle configurations without requiring extensive modifications. Its aesthetically appealing look, complemented by a modern grille design, not only enhances the speaker's visual appeal but also protects it from potential damage.

Moreover, the TS-WM7 employs a frequency response range that spans from low bass to high treble, allowing it to reproduce different musical genres with precision and clarity. This versatility makes it an excellent choice for audiophiles who appreciate nuanced sound.

Equipped with a robust build quality, the TS-WM7 is engineered to withstand the challenges of car environments, including temperature fluctuations and vibrations. This durability ensures that your investment in high-quality sound remains intact over time.

In summary, the Sony TS-WM7 is a premium speaker option that combines advanced technologies and exceptional sound performance to meet the demands of modern car audio systems. Whether you're cruising on the highway or stuck in traffic, the TS-WM7 ensures an immersive audio experience that brings your favorite music to life.
Top Page Image Contents