TELETEXT ACCESS
Select YES to enable the Teletext feature or NO to disable the Teletext feature. For models without Teletext feature, selection of YES or NO has no effect.
SECURITY
Select HIGH and only remote control RC2573GR can be used to enter TV Setup menu.
OTHER FEATURES
ALARM
The Alarm feature will require the time to be set correctly according to the CLOCK SETUP procedure in page 12. 
To set the alarm, press the key to enter the ALARM menu as shown below. If the time has not been previously set, the “NOT AVAILABLE” message will appear on the TV screen.
|
| 12:30 |
| ALARM |
|
ALARM | TIME | |
ALARM | STATUS | OFF |
Use the remote control numeric keys to enter the desired ALARM TIME. Once the time has been entered, the ALARM STATUS will change to ON. Any key on the remote control can be used to cut off the alarm buzzer.
To deactivate the alarm, press the 
key on the remote control.
LOW BATTERY CHECK
Press the OK | key for approximately 5 seconds. The following appears: | |
SERVICE |
| |
1 | REMOTE BATTERY | OK |
If battery is low, the word LOW will appear in place of OK.
It is an indication that you need to replace the batteries in the remote control.
TELETEXT (for models with Teletext feature only)
To enter Teletext mode, press the b key.
Function | RC2886/RC2887 keys | |
Page up | + |
|
TV |
| |
|
| |
Page down | - TV |
|
Select a page | Digit |
|
Direct access to a subject |
|
|
To select Teletext subpage | ( ˝ ) or | ( ˙ ) |
18
18 | 2/17/05, 1:01 PM |