4 Connecting peripheral equipment
Equipment such as VCR, Laser disc player, VCD etc. could be connected to the video and audio (AV) sockets at the back of the TV. Switch off the TV and equipment before making any connection.
Connection for playback
VIDEO 2 VIDEO 1 MONITOR
in in out
VIDEO
L
AUDIO
R
VCR
OR | VCR |
| |
| OR |
Laser disc | VCD |
player |
|
1.Connect to AV sockets
•connect the corresponding sockets of the equipment to that of the TV.
•to view the playback, select a channel named AV1 (if connection is made to sockets at VIDEO 1 in) or AV2 (if connection is made to sockets at
VIDEO 2 in).
Note : If you have connected a computer game set to VIDEO 1 in, select a channel named GAME1 to playback. If your connection is made to VIDEO 2 in, then select GAME2 to playback.
VIDEO 2 | VIDEO 1 | MONITOR |
in | in | out |
75 Ω |
| VIDEO |
|
|
g
L
AUDIO
R
2.Connect to aerial socket
(only for VCR)
The playback on your VCR is considered a TV channel by your TV if you connect via the aerial socket. You must tune in to your VCR’s test signal and assign the channel number 0 to it. Refer to your VCR’s instruction manual for more details.
•connect the RF cable to the VCR’s “RF in” and connect the “RF out” of the VCR to the aerial socket of the TV.
•select channel 0 and tune in to to your VCR’s signal.
•to view the playback, select channel 0.