Mosaic screen
(for TV sets with the Picture in Picture option)
|
|
|
| j |
|
g | b | h | f | m |
|
L | G | B | F N |
| |
L A K |
| L P K |
| ||
p | q | r s | t | u | |
F | H |
| u | M | |
|
| ||||
4 Open the door of the remote control.
4 Press u.
5 A menu line MOSAIC appears on the bottom of the screen. It contains three functions : Scan, Photo Fin., Strobe.
4 Select with the keys C or B the function you want to activate and press OK.
Scan
5 A scan of the stored TV channels is performed, starting with the favourite programme stored under the lowest programme number.
Only TV channels placed in the favourite list are displayed. On the last position, a live picture is shown of the programme that was displayed before the mosaic screen was switched on, except when you were watching a picture from a peripheral. In this case the picture of the following favourite TV channel appears in the last position.
4 Press OK again.
5 A following series of stored TV channels from the favourite list is scanned. Each mosaic picture will contain its identifying programme number and name.
4 Select a TV channel with the digit keys.
5 The mosaic screen disappears and the selected TV programme is displayed.
4 Press u to interrupt the scan function and to switch off the mosaic screen.
Never perform a scan while recording a TV programme with a video recorder recording from EXTERNAL 1or 2 since the scan will be recorded on tape.
Photo Finish
5 The main picture is displayed in successive frozen pictures. The last picture on the bottom right will remain live.
4 Press OK again.
5 A new photo finish picture is displayed, overwriting the old one.
4 Press u to switch off the photo finish function and the mosaic screen.
Strobe
5 The picture is reproduced image by image. So you get an interrupted movement.
4 Press OK again.
5 The picture is reproduced image by image at a faster speed.
4 Press u to switch off the strobe function and to switch off the mosaic screen.
English
27