Philips 29PT9111/01 manual Tips, End of life directives

Page 39

Tips

Care of the screen

Clean the TV with a slightly damp soft cloth. Do not use abrasive solvent as it can damage the TV screen coating layer.

Poor Picture

Have you selected the correct TV system ? Is your TV set or house aerial located too close to loudspeakers, non-earthed audio equipment or neon lights, etc. ?

Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the outside aerial.

Is the picture or teletext unrecognisable ? Check if you have entered the correct frequency. See Installation, p. 8.

Are brightness and contrast out of adjustment ? Press the M key.

Switch off your TV overnight with A on the front of the TV.

Sometimes poor picture quality is possible when having activated a S-VHS camera or camcorder connected to the front of your TV and another peripheral is connected to EXT1 or EXT2 at the same time. In this case switch off one of the other peripherals.

No picture

Is the aerial connected properly ? Are the plugs tightly connected in the aerial socket ? Is the aerial cable in good condition and does it have suitable plugs ? Are the connection facilities to a possible second TV in good condition ? If in doubt, consult your dealer.

No picture means that the aerial peripheral equipment is transmitting no picture.

Have you pressed the correct keys on the remote control ? Try once more.

Did you press a again after switching on teletext ?

Has the child lock been switched off ? See Features, p. 20.

Sound

 

Did you perhaps interrupt the sound with

 

the c key ? Were the internal

 

loudspeakers switched off by the switch on

 

the back of your TV set ? See Extra

 

loudspeakers, p. 35. Is the sound coming out

 

of only one loudspeaker ? Is the balance

 

perhaps set to one extreme ? See SOUND

 

menu, p. 16.

 

Select Spatial On in the Sound menu if

 

there is no sound coming out of the extra

 

loudspeakers at the back. See Spatial, p. 17.

English

If your TV no longer responds to the

Remote control

 

remote control. Check whether the

 

remote control is in the TV operation

 

position. Press the TV key once more.

 

Perhaps the batteries are exhausted. See

 

Preparation, p. 4.

 

You can still use the Local Menu keys at the

 

front of your TV.

 

Menu

 

Have you selected the wrong menu ? Press

 

MENU again to exit from the menu.

 

Connections

 

Check whether your peripheral equipment

 

is properly connected. See p. 33.

 

Have you switched on the peripheral

 

equipment ?

 

No solution

 

Switch your TV set off and then on again.

 

Never attempt to repair a defective

 

TV yourself.

 

Check with your dealer or call a TV

 

technician when in doubt.

 

End of life directives

Your new TV contains materials which can be recycled and reused.

At the end of life specialised companies can dismantle the discarded TV to concentrate the reusable materials and to minimise the amount of materials to be disposed of.

Please ensure you dispose of your old TV set in accordance with any local regulations.

How to dispose of exhausted batteries ?

The Philips batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many countries exhausted batteries may not be disposed of with your household waste. Please ensure you dispose of exhausted batteries according to local regulations.

39

Image 39
Contents Contents Your remote control Video recorderPicture In Picture Surround Sound loudspeakers PreparationRemote control Switch TV onSelect the menu language Select CountryPress OK Store TV channels Automatic installationManual installation Press Menu Installation menu reappears Go on toSearch for a TV channel Manual installationPress Menu Enter the programme numberEnd Direct selection of a TV channelReshuffle the programme list Enter or modify a programme nameSelect Favourite TV channels Install TV ConfigurationExt. Amplifier Yes Surround ModeCentre Mode Normal or Wide External amplifierProgramme lights up Keep the Menu key pressed to switch off all menusFast exit from the menus Select Programme with the keys V or WSwitch menus on and off Switch TV onSwitch to standby Adjust the volumeSharpness Select the picture settingsAdjust picture settings Main MenuDynamic Contrast TintSelect the sound styles with the sound menu Select the sound settingsAdjust sound settings Select Graphic Equalizer with the keys V or W and press OKSelect Spatial sound Select the sound modeSwitch Loudness on or off Select SpeechDolby* Pro Logic Install Surround Mode lights upMarked with Dolby Surround Local menu adjustments disappear VolumeChild Lock FeaturesSleeptimer Pip SizeMessage Press OK when you have entered the complete messageStart Time lights up TimersRecording Source Select Programme listInformation on screen Other functionsVertical Squeeze Bilingual broadcastClock Adjust BrightnessPermanent Programme Number Select previous programmePP key Open the door of the remote control Press MPhoto Finish Mosaic screenScan Select a TV channel with the digit keysPip Picture in Picture Switch pip on and offOpen the door of the remote control Press p Press p again to switch pip offSelect Pip size Switch screensSelect Still Picture Move the pip screenSelect a Teletext Switch Teletext on and offTeletext About the Easy Text systemQuickly run through the teletext pages Select subpagesSelect the index teletext Select Special teletext functions Select Continuous SubtitlesSearch for and store the test signal of the video recorder Connect Peripheral EquipmentTV and video recorder Headphone TV and a CD-i/Photo CDAudio equipment Camera and camcorderConnect a decoder without an aerial socket to the TV Extra loudspeakersDecoder Connect a decoder with an aerial socket to the TVTVB Record with your video recorder Keep Menu pressed for a short while to switch off each menuOperate the video recorder with the TV remote control End of life directives TipsIndex Favourite programmes, 10 features Freeze, 25 frequency