Installing your television set
æ Â ê ®
Insert the aerial plug into the : socket at the rear of the set.
Insert the mains plug into a wall socket
Insert the two R6- type batteries (supplied) making sure that they are the right way round.
To switch on the set, press the on/off key. If the television remains in standby mode, press P # on the remote control.
Quick installation
The first time you switch on the television, a menu appears on the screen and the tuning starts automatically.
Autostore
••••••••••••••••••••••• 0 Æ
If the menu is not displayed, press and hold down the ”- and ”+ keys on the TV set for 5 seconds to display the menu.
All the available TV programs will be stored. This operation takes a few minutes.The display shows the progress of the search and the number of programs found. At the end of the search, the menu disappears.
The programmes found are arranged by number 99, 98, 97, …etc.You may now renumber these programmes as you wish. See Program sort below.
To exit or interrupt the search, press H.
If no programme is found, see Tips chapter at the end of the instruction for use.
Program sort
&Press key H.The Main menu is displayed on the screen.
Manual Store
Æ
System | Europe Æ |
Search | 224 MHz |
|
|
éWith the î key, select Manual Store and press ¬.
“Use the 09 or @P# keys to select the
program you wish to renumber.
‘Then use the Ï key to select Program No and enter the new number with the Ȭ
keys.
(With the Ï key, select Store and press ¬. § Repeat steps “ to ( for each program you
wish to renumber.
è To quit the menus, press d.
1